.
Категории сайта
1/
:

Тренировочный CES тест онлайн для моряков по Marine Lubricants

Добро пожаловать на страницу, где вы можете пройти тест CES онлайн по теме “Marine lubricants” (смазочные материалы на судне). Данная практика поможет вам, как морскому специалисту, подготовиться к сдаче экзаменов, получению сертификата компетентности или аттестата.

Выберите режим, в котором хотите пройти CES тест по теме “Смазочные материалы”:

Тренировка - CES тест: смазочные материалы
Тренировочный
Аттестация - CES тест: смазочные материалы
Аттестация
Начать тест
Base oil combinations are selected to meet:
Pour point.
Viscosity index.
Operational conditions.
Oxidation stability.
Принять ответ
Crude oils are roughly classified as:
Paraffinic, naphthenic and mixed base.
Straight and branched chain.
Waxy and asphaltic.
Heavy and light.
Принять ответ
Friction modifiers or “oiliness additives” will:
Improve the viscosity index.
Reduce friction under boundary conditions.
Increase the pour point.
Extend lubricating oil life time.
Принять ответ
In which type of equipment is low pour point and good wax depositing important?
Refrigeration compressors.
Deck winches.
Medium speed trunk engines.
Hydraulic cranes.
Принять ответ
Lubricant base oils generally exhibit boiling points above:
300 °C.
200 °C.
150 °C.
100 °C.
Принять ответ
Marine lube oil extracted from Naphthenic Base oil is suitable as:
Engine oils.
Turbine oils.
Refrigerator oils.
Industrial process oils.
Принять ответ
Mineral oils are generally complex mixture of Hydrocarbons. What is the range of presence of carbon atoms in one molecule of hydrocarbon in a Lubricant base oils?
20-50.
50-70.
Принять ответ
Name the properties, that are exhibited by Aromatic hydrocarbons?
Poor chemical stability.
High viscosity indices.
High pour points.
Принять ответ
Name the two properties of Marine Lube oil extracted from paraffin base oil:
High viscosity index.
Low volatility/evaporation loss.
High pour point.
High thermal stability/resistance to cracking.
Принять ответ
Oxidation inhibitors are:
Removing oxygen from the oil.
Dissolving oxygen in the oil.
Preventing rust.
Counteracting chemical breakdown.
Принять ответ
Solvent extraction is a:
Vacuum distillation process.
Physical process removing aromatics.
Atmospheric distillation process.
Hybrid process.
Принять ответ
Synthetic hydrocarbons are:
Organic esters.
Fluoroalkylether and silicate esters.
Polyolefin’s, hydrocracked mineral oils and alkylates.
Polyether’s and polyalkylene glycols.
Принять ответ
Synthetic oils are manufactured by:
Polymerisation of selected monomers.
Hydro-catalytic Process.
Synthesied by chemical processes using a variety of raw materials.
By Hybrid process.
Принять ответ
The main advantages of Synthetic oil over mineral oil are:
The properties required by the equipment’s can be accurately met.
Longer oil life.
Low cost factor.
Low water absorption.
Принять ответ
The refined lubricant base oil properties are greatly influenced by:
Storage and treatment.
Refining process.
Chemical treatment.
Crude oil composition or origin.
Принять ответ
This is an example of:

Example of lubrication

Elastohydrodynamic lubrication.
Hydrodynamic lubrication.
Boundary lubrication.
Extreme pressure lubrication.
Принять ответ
What is EP (Extreme Pressure) oil?
Additive forming a protective chemical surface film.
High pressure hydraulic oil.
Standard gear oil.
High maximum pressure cylinder oil.
Принять ответ
What is a typical BN level for a two stroke engine cylinder oil?
BN 70 – BN 100.
BN 10 – BN 20.
BN 50 – BN 70.
BN 5 – BN 10.
Принять ответ
What is elastohydrodynamic lubrication?
A combination of different lubricating oils.
An additive to keep the viscosity index stable under various conditions.
The contacting surfaces are elastically deformed, distributing the load over a greater area.
Water is added to the oil because it is not compressible and we can increase the load.
Принять ответ
What is mixed lubrication?
When formation of a fluid film is partly established.
When using grease and lubricating oil together.
When mixing mineral and synthetic oils.
When changing type of lubricating oil from time to time.
Принять ответ
What is the “NLGI” number of a grease indicating?
How water resistant the grease is.
How fluid or non-fluid the grease is.
The grease compatibility.
The grease expected life time.
Принять ответ
What is the main criterion for fluid lubricants operating under hydrodynamic conditions?
Viscosity.
Anti-wear agents.
Flow of lubricant.
Temperature of bearing.
Принять ответ
What is the most important property of a lubricating oil for reciprocating air compressors?
Good anti-wear property.
High viscosity index.
Low carbon-forming tendency.
Good corrosion protection.
Принять ответ
What is the single most important element for gear oils?
Shear stability.
Anti-wear performance.
Corrosion prevention.
Viscosity.
Принять ответ
What is typical BN level for a trunk piston engine operating on residual fuel oil?
BN 70 – BN 100.
BN 5 – BN 10.
BN 40 – BN 50.
BN 30 – BN 40.
Принять ответ
What type of refiring process will greatly reduce the influence Crude oil origin?
Solvent refining.
Severely hydro-processed.
Принять ответ
Why can EP Additives only be used on ferrus metal surfaces?
Will be chemically bound to other metals.
Will change viscosity.
May be corrosive to other metals.
Will change chemical composition.
Закончить тест
* В некоторых вопросах теста по может быть несколько правильных ответов.
“CES тест” пройден! Ваш результат:
Нашли ошибку? Выделите и нажмите CTRL+Enter
Март, 28, 2022 390 0
Добавить комментарий

Избранные статьи
Loading

Здесь будут храниться статьи, сохраненные вами в "Избранном". Статьи сохраняются в cookie, поэтому не удаляйте их.

Статья добавлена в избранное! Перезагрузка...
Вставить формулу как
Блок
Строка
Дополнительные настройки
Цвет формулы
Цвет текста
#333333
Используйте LaTeX для набора формулы
Предпросмотр
\({}\)
Формула не набрана
Вставить