Ответы на Seagull CES тест по Deck Support Level Oil Tanker

Добро пожаловать на страницу, где вы можете найти ответы на CES тест (Crew Evaluation System) онлайн по теме «Deck Support Level Oil Tanker» (палуба/поддержка/нефтяной танкер). Данная страница поможет вам, как морскому специалисту улучшить свои знания с помощью открытой информации, где размещены как вопросы, так и ответы теста. Основанные на доказательных эмпирических данных и опыте морских специалистов, показательные и эффективные объединенные материалы CES тестов используются на практике в предметных областях.

Разработанные для оценки базовых знаний моряков CES тесты компании Seagull (после ребрендинга OTG) представляют собой онлайновый инструмент оценки, используемый для выявления потребностей в профессиональной подготовке, специфичных для областей знаний, определенных в ПДНВ, ответы на которые вы найдете ниже.

Версия: 5.2.9, 6.0.10.
Тип теста: STCW.
Департамент: палубный.
Уровень: поддержка.
Тип судна: нефтяной танкер.

В процессе отбора и набора персонала, а также для измерения уровня знаний существующих офицеров и экипажа, CES тест хорошо показал себя по всем параметрам. Ocean Technologies Group использовали для создания вопросов обширные темы, которые включают:

Управление кризисными ситуациями и скоплением людей;
Интегрированная навигационная система;
Управление балластными водами;
Обработка и укладка грузов;
Управление эксплуатацией судна и безопасностью;
Морская инженерия;
Техническое обслуживание и ремонт, и многие другие темы.

Тема «Deck Support Level Oil Tanker» включает в себя теоретическую и практическую информацию, знание которой напрямую показывает профессиональность работника, занимающего соответствующую должность на борту судна. Офицер, отвечающий за поддержку палубы на нефтяном танкере, имеет важные обязанности. Он отвечает за обеспечение безопасности на палубе, контролирует соблюдение правил безопасности и координирует погрузочные и разгрузочные операции. Офицер также отвечает за управление оборудованием и системами на палубе, поддерживает необходимую документацию и сотрудничает с другими членами экипажа.

На этой странице содержатся ответы к тесту «Deck Support Level Oil Tanker» на 410 вопросов, которые можно использовать в случае затруднения в любом вопросе во время прохождения проверки на профессиональную компетентность.

Воспользуйтесь поиском, чтобы найти интересующий вас вопрос. Достаточно ввести одно слово или часть его, чтобы фильтр заработал.

Количество отображаемых вопросов: 470.

Правильные ответы отмечены знаком .

Code: LARA On the figure there are four (4) possible definitions of the term “BREADTH” given. Which one is the correct one?

Breadth is given by A on the figure.

Breadth is given by C on the figure.

Breadth is given by B on the figure.

Breadth is given by D on the figure.

Code: EOHW The rotating jet water outlets on tank cleaning machines used on board oil tankers is called:

Turbines.

Distributors.

Nozzles.

I don’t know.

Code: XHJI In the diagram, which arrow is pointing at the position known as the “Bridge”?

The Bridge is indicated by A.

The Bridge is indicated by B.

The Bridge is indicated by C.

The Bridge is indicated by D.

Code: JIQO The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed below the vessel shaded. On this figure there are four (4) possible definitions of the term “UNDERKEEL CLEARANCE” given. Which one is the correct one?

Underkeel clearance is given by B.

Underkeel clearance is given by C.

Underkeel clearance is given by A.

Underkeel clearance is given by D.

Code: TVWK What is the correct understanding of the term “Bottlescrew”?

A bottlescrew is the connection ring on the ships deck used to connect lashings and rigging.

A bottlescrew is the threaded screw used to open large bottles.

A bottlescrew is a metal threaded sleeve which adjust the length and tenstion on rigging or stays.

I don’t know.

Code: AWWH What are the duties of an effective bridge look out?

Keeping a constant observation around the ship.

Ensure there is always a bridge lookout on duty and only leave the lookout when given permission.

Keep a lookout for other ships; navigation lights and any other dangers which may have no lights.

All of the alternatives specified.

Code: GAQJ What is the meaning of the term “Steady as she goes” when acting as helmsman?

Reduce the number of helm movements used when steering a set course.

While altering the ships head, the instruction “steady as she goes” means reduce the ships swing as rapidly as possible and steady on present course.

Try to reduce the continuous swinging either side of the course when steering a compass course.

Keep the applied rudder constant until the next helm order.

Code: TNOX What is the inherent danger in welding/cutting in piping containing freon?

Depletion of the ozone layer.

Depletion of oxygen in the air.

Development of explosive gas.

Development of nitrous gases.

Code: XKXS When you are on watch during a stay in port, what should you always ensure is ready at the head of the gangway?

Life buoy with line.

Notice board stating the sailing time of the ship.

A telephone to contact shore terminal control.

I don’t know.

Code: KVCC When a vessel arrives at a port to pick up a pilot and enter harbour, there should be someone required to stand by the anchor forward. How should the anchor be prepared and ready?

The brake securely applied, all cement/covering into the chain locker and securing arrangements from windlass removed. The guillotine can remain for removal when ready.

The brake may be insufficient to hold the anchor, so leave everything in place except the cement/covering of the chain locker.

The use of the anchor will not normally be required when going straight into port, so the anchor does not need to be prepared, but left ready for going back out to sea.

I don’t know.

Code: BHUW What is the necessary protection when you are rust chipping with air tools?

Goggles and ear protectors.

Protective clothing, safety shoes, earmuffs.

Gloves, goggles, earmuffs.

Protective clothing, safety shoes, gloves, goggles, earmuffs.

Code: GSXA The process of settling of slops on an oil tanker is:

Allowing the oil and water to separate out.

Allowing any waxy layers to settle below the residual oil.

Allowing the mixture to rest once it has been pumped into the slop tank, so that any static charge disperses.

Allowing any sediment to separate out and drop to the bottom of the tank.

Code: ESIY After having discovered a small leak of oil at the ships manifold during discharge, you would:

Advise the terminal.

Notify the Officer in charge of the operation.

Put a bucket under the leak.

Pretend you have not seen it.

Code: VTOD The correct method to dispose of any oily/water mixture in the manifold drip-tray is to:

Drain it to a cargo tank.

Mix in an appropriate quantity of dispersant chemicals and drain it overboard when in open water.

Transfer it to the sloptank and later discharge it to a reception facility.

Drain it overboard when the vessel is 50 nautical miles off the coast.

Code: AGQB When you are taking an “ullage” on a cargo tank on an oil tanker, what are you actually doing?

Measuring the distance from the bottom of the tank to the ullage reference point.

Measuring the distance from the surface of the cargo to the ullage reference point.

Measuring the distance from the bottom of the tank to the surface of cargo.

Measuring the distance from the surface of the cargo to the underside of the maindeck.

Code: HMSW An inert gas system is used during a Crude Oil Washing operation:

To build up internal pressure and so increase the pumping rate.

To protect the condition of the steel structure of the tank.

To ensure a safe atmosphere in the cargo tank throughout the operation.

I don’t know.

Code: DCQB Which is the “STARBOARD BOW”, in the figure?

Starboard bow is given by B.

Starboard bow is given by C.

Starboard bow is given by A.

Starboard bow is given by D.

Code: TEDC What indicates “MIDSHIPS”, in the figure?

Midships is indicated by D.

Midships is indicated by C.

Midships is indicated by B.

Midships is indicated by A.

Code: MECU Which mooring lines are shown in this picture?

The forward back springs.

The forward breast lines.

The forward headline and breast rope.

The forward head lines.

Code: CGON Mention some important thoughts for what you have to do when you recognise that fire break out onboard.

Report to bridge or duty officer, actuate the fire alarm, call the persons around the fire and join the fire squad.

Go to the lifeboat start the motor then call the duty officer and commence fight the fire.

Report to bridge or duty officer, actuate the fire alarm, organise and commence fighting the fire.

I don’t know.

What is the meaning of this symbol?

Liferaft.

Release gripes.

Lifeboat.

I don’t know.

The diagram shows the direction that a rope runs during a mooring operation and a possible place where it may break. Where would be considered the safest position to stand?

Outside the blue coloured zone.

Inside the blue coloured zone.

Behind the point of restraint, but inside the blue coloured zone.

Between the “point of break” and the “fairlead”.

The diagram shows the lead of a rope during mooring operations, and the possible point where it may break. Where would be considered the safest place to be standing?

Where ever you feel safe.

Outside the coloured zone.

Behind the “point of restraint” but inside the zone.

I don’t know.

Code: SNOL What kind of safety equipment must be worn during mooring operations?

Boiler suit, working gloves.

Dress according to the climate.

All of the mentioned equipment.

Safety helmet, safety shoes.

Code: AQBO What will you bring in a lifeboat if the ship is abandoned?

Warm clothes, blankets and lifevests.

As much biscuit and canned food as possible.

All pets that will most likely not be able to enter the boat by themselves.

All valuables like money, jewelry etc.

Code: BSHD A class D fire involves what type of material?

Metals.

Gases.

Wood or other carbonaceous material.

Liquids.

Code: MAOX Which one of the listed fire-extinguishing medium is to be preferred to fight a fire in an electric installation (for example the main switchboard)?

Foam.

Powder.

Gas.

Sprinkler.

Code: GRPI If the relief for the bridge lookout does not appear at the end of the watch, when required, what should be the actions of the existing lookout?

The lookout should go down the accommodation to see where the relief is and make him/her go to the lookout position.

Inform the Officer of the Watch that you are going to call your relief.

He should inform the Officer of the Watch and wait for instructions.

I don’t know.

Code: WCRQ How is a EPIRB (Emergency Position Indicating Radio Beacon) activated?

Most EPIRBs are automatically activated when they enter the water.

Most EPIRBs are remotely activated from the ship.

The EPIRBs is always transmitting and does not need to be activated.

I don’t know.

Code: YAVX What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Port 20” and after a while the order: “Ease to 10”?

Turn the wheel until the rate of swing of the ship is 20 degrees per minute and then after the second order, reduce the wheel to make it swing at only 10 degrees per minute.

Apply the wheel to alter the course 20 degrees to port and then after the second command change the heading a further 10 degrees.

Apply 20 degrees of rudder towards port and then after the second command reduce the wheel to 10 degrees of helm.

I don’t know.

Code: JKRE How should you, as helmsman, give feedback to the OOW (officer on watch) that his orders are understood?

By saying: “OK”.

By saying: “Yes, Sir”.

By repeating the order.

You don’t have to give any feedback.

Code: PRRL In which ways is heat transmitted?

Conduction, convection and radiation.

Delay, conduction, radiation.

Gasification, conduction and convection.

Radiation and gasification.

Code: DFYB What are three diameters of fire hoses most commonly found on ships?

10, 50 or 85 mm.

25, 45 or 70 mm.

17, 43 or 74 mm.

I don’t know.

Code: HPVB You are carrying out a search in a smoke filled compartment wearing a breathing apparatus. At what stage should you start to make your way out of the compartment?

Wait until the breathing apparatus warning whistle sounds.

Regularly check your pressure gauge and note how much air you used to reach your work area. Start to return when you have this amount left plus a reasonable reserve.

Wait for the appropriate signal on your safety line as the personnel outside will be keeping a track of the time you have spent inside.

I don’t know.

Code: QYMA Give the meaning of the following symbol:

Primary means of escape.

A class division.

B class division.

Secondary means of escape.

Code: SERD A person wearing an anti-exposure suit shall be able to:

Perform all duties associated with abandonment, assist others and operate a rescue boat.

Jump from a height equal to that of the stowage of liferafts arranged to be thrown overboard.

Don and remove the suit in the water in no more than 5 min. If it impairs ability to swim.

Dive into the water to the maximum draft of craft that the ship is provided with.

Code: QMYC In which way shall a survivor be hauled out of the sea?

In 45° angle.

Vertical.

Horizontal.

None of above.

Code: NGPM An inflatable lifejacket will inflate:

Either automatically on immersion or by mouth.

Automatically on immersion.

Either automatically on immersion or by a single manual motion or by mouth.

Either automatically on immersion or by a single manual motion.

Code: QNVP How many thermal protective aids are carried in each liferaft?

10 % of the number of persons the liferaft is designed to carry, or two, whichever is the greatest.

Nil.

Code: ANOY How many rocket parachute flares are carried in each lifeboat?

12.

Nil.

Code: DPOW When must personal protective equipment be worn:

When making the vessel fast.

At all times when identified as a control method with risk assessment.

Only on deck.

Only in the engine room.

Code: AMVW What kind of warning signs should be placed on manholes into void spaces?

No smoking signs.

Danger of explosion signs.

Warning signs that indicate lack of oxygen inside.

Breathing apparatus mandatory sign.

Code: KGMX What is the purpose of the Ship Security Plan?

Protect your ship from risks posed by security threats or incidents.

Outline the organizational structure for the ship.

Outline specific measures for your ship to move from security level 1 to 2 and from 2 to 3.

I don’t know.

Code: IELO This device can detect a package of drugs inside a large delivery of ship’s stores. What is it?

Vapour detector.

Security container.

Pallet scanner.

I don’t know.

Code: APBL You have been assigned to enter a hold and check the general cargo stowed in it, as part of an on-passage monitoring procedure. What must be in place before you can do that?

The necessary permits, based on valid atmospheric and other applicable tests.

Written instructions from the Chief Officer on what to check in the hold.

A list of the items stowed in the applicable hold, extracted from the Cargo manifest, must be available for reference during the check.

I don’t know.

Code: AGOS What is understood by the term “take the helm”?

Take over the steering of the ship.

Take over heaving of a rope.

Change the place where the lookout is standing.

I don’t know.

Code: OIEA Is it always possible to use the word “ship” instead of the word “boat”?

A boat can only be used for vessels under 50 metres in length.

Normally a small vessel is called a “boat” rather than a “ship”, otherwise it is not important.

Either can be used anytime.

I don’t know.

Code: PXVJ What do you understand by “Secure the tug”?

To make fast the tug.

To let go the tug.

To pass a line to the tug.

I don’t know.

Code: YQTG How would you alert others onboard if you saw a person falling overboard?

If I saw a person falling overboard I would shout once, “Man overboard”.

If I saw a person falling overboard I would shout repeatedly, “Man overboard”.

If I saw a person falling overboard I would run to the Bridge.

If I saw a person falling overboard I would inform the Bosun.

Code: WJQC Whenever there is a major bleeding, the first priority should be to:

Stop the bleeding.

If Raise an alarm.

Call the doctor.

Take the pulse of the patient.

Code: HJKO You must not attempt to move a casualty carelessly, if you suspect patient with:

Sleeping.

Fractured spine.

Consumed excess alcohol.

Unconscious.

Code: XATB During cargo or bunker operations, oil response equipment is to be:

Ready for immediate use.

Used elsewhere in the ship.

In its store room.

I don’t know.

Code: YLMY When is it good practice to check the pressure-vacuum valves?

After cargo transfer operations.

Before the next dry-docking.

Prior to cargo transfer.

I don’t know.

Code: GMAN The Explosimeter is an instrument to measure:

The composition of hydrocarbon gas / air mixtures in a tank atmosphere.

The amount of H₂S gas in a tank atmosphere.

The level of oxygen present within a tank.

I don’t know.

Code: KNAY The oil product particularly associated with the danger of contracting leukaemia through exposure to its vapours is:

Octene.

Benzene.

Xylene.

I don’t know.

Code: YCFI When loading a static accumulator oil, to minimise the risk of explosion through electrostatic charge in a tank it must be ensured that:

No metallic devices such as those used for gauging and sampling, should be introduced into the tank during loading and for 30 minutes after completion of loading.

No metallic sampling devices over 2 litres capacity should be permitted on the cargo deck at any time, unless thoroughly cleaned beforehand with soapy water.

No rubber containers over 1 litre capacity, such as those used for sampling, should be introduced into the tank between completion of loading and for 10 minutes after that time.

I don’t know.

Code: EODR On the figure there are four (4) possible definitions of the term “AFT” shown. Which one is the correct one?

Aft is defined as A on the figure.

Aft is defined as C on the figure.

Aft is defined as B on the figure.

Aft is defined as D on the figure.

Code: DBSU On the figure there are four (4) possible definitions of the term “BOLLARD” given. Which one is the correct one?

Bollard is given by C on the figure.

Bollard is given by D on the figure.

Bollard is given by B on the figure.

Bollard is given by A on the figure.

Code: DTIP Which is the “CAPSTAN”, in the figure?

The Capstan is indicated by D in the figure.

The Capstan is indicated by A in the figure.

The Capstan is indicated by B in the figure.

The Capstan is indicated by C in the figure.

Code: DCQB On the figure there are four possible definitions of the term “STARBOARD BOW” given. Which one is the correct one?

Starboard bow is given by B on the figure.

Starboard bow is given by A on the figure.

Starboard bow is given by C on the figure.

Starboard bow is given by D on the figure.

Code: EBWH The figure shows a cross section through a ship floating in water, with the hull in red and the seabed below the ship shaded. On the figure there are four (4) possible definitions of the term “FREEBOARD” given. Which one is the correct one?

Freeboard is given by B on the figure.

Freeboard is given by A on the figure.

Freeboard is given by C on the figure.

Freeboard is given by D on the figure.

Code: JAFM What is the correct understanding of the term “FAIRLEAD”?

A fairlead is the hole through the deck where the anchor chain passes into the chain locker.

The access point where mooring lines are lead when making fast to the shore.

A fairlead is the direction that a mooring rope makes from the ship when made fast to the shore.

A fairlead is the hole through the ships side through which the anchor chain passes.

Code: GKPM On a fire patrol at night you see smoke coming from a closed cabin door. What action should you take first?

Activate the nearest fire alarm button and advise bridge of the location of the fire.

Take a look inside the cabin to see what the situation is.

Get the nearest fire extinguisher and then open the door to see what the situation is.

As most people are sleeping, call a friend and ask him to assist in putting out the fire.

Code: HSTT Hydrocarbon gas encountered in oil tankers cannot burn in an atmosphere containing less than approximately what percentage of oxygen (by volume)?

11 %.

15 %.

17 %.

13 %.

Code: OSDQ Who is authorised to operate lifting equipment around the ship?

Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the procedures as outlined in the ship’s SMS system.

Stevedores, manufacturer’s maintenance engineers and senior ratings only.

Deck officers and ratings, engineering officers and ratings, GP crew if applicable, who are in possession of crane operation training certificates issued by the company.

All deck officers and ratings and selected engine room personnel.

Code: PFDT When an oil tanker is fitted with two slop tanks, how are they commonly referred to?

Primary slop tank and secondary slop tank.

Slop tank (cycle A) and slop tank (cycle B).

Nominal slop tank and back-up slop tank.

Slop tank (settling) and slop tank (decanting).

Code: KVYO The abbreviation “COW” applies to a phase of oil tanker operations. What does it stand for?

Crude Oil Washing.

Computer Operated Washing.

Callibration (of) Oil/Water (interface).

Completion of Washing.

Code: YQTK What is the first thing you are doing when having a lifeboat drill?

Put on the life jacket.

Swing out the davit.

Wait for order.

Enter the lifeboat.

Code: ESIY You have discovered a small leak of oil at the manifold during the discharge of an oil cargo. What is the first thing you should do?

Notify the Officer charge of the operation.

Advise the terminal.

Put a bucket under the leak.

Pretend you have not seen it.

Code: AGQB When you are taking an “ullage” at a cargo tank on an oil tanker, what are you actually doing?

Measuring the distance from the surface of the cargo to the ullage reference point.

Measuring the distance from the bottom of the tank to the ullage reference point.

Measuring the distance from the bottom of the tank to the surface of cargo.

Measuring the distance from the surface of the cargo to the underside of the maindeck.

Code: BRKR “UFL” and “LFL” are commonly used abbreviations associated with cargo and cleaning operations on an oil tanker. What do the letters stand for?

Upper Flammability Limit and Lower Flammability Limit.

Upper Flash Point Level and Lower Flash Point Level.

Unidentified Fire Liability and Located Fire Liability.

Upper Filling Level and Lower Filling Level.

Code: MKMI What is commonly recognised as the main hazard associated with unprotected entry into an enclosed space within the cargo area on an oil tanker?

The atmosphere within the space may potentially contain too little oxygen or it may contain toxic vapours.

There are no significant hazards associated with entry into enclosed spaces on tankers.

There may be restrictions on access and mobility within the space.

There may be a lack of adequate illumination for safe movement within the space.

Code: QDND What is the requirement for bolting-up and securing blind flanges on the manifolds during cargo operations on an oil tanker?

A bolt to be in every bolt hole, tightened evenly.

A bolt to be in every alternate bolt hole, tightened evenly.

Bolts or clamps to be fitted such that the flange is adequately sealed.

A minimum of 4 bolts, spaced evenly around the flange.

Code: NECK On the figure 4 possible definitions of the term “AFT SPRING” are shown. Which one is the correct one?

Aft spring is defined as A on the figure.

Aft spring is defined as B on the figure.

Aft spring is defined as C on the figure.

Aft spring is defined as D on the figure.

Code: LARA On the figure 4 possible definitions of the term “BREADTH” are given. Which one is the correct one?

Breadth is defined as B on the figure.

Breadth is defined as A on the figure.

Breadth is defined as C on the figure.

Breadth is defined as D on the figure.

Code: DCQB On the figure 4 possible definitions of the term “STARBOARD BOW” are given. Which one is the correct one?

Starboard bow is defined as A on the figure.

Starboard bow is defined as B on the figure.

Starboard bow is defined as C on the figure.

Starboard bow is defined as D on the figure.

Code: IITK Which is the “STERN LINE” in the figure?

The Stern Line is defined as A on the figure.

The Stern Line is defined as B on the figure.

The Stern Line is defined as C on the figure.

The Stern Line is defined as D on the figure.

Code: MECU Which mooring lines are shown in this picture?

The forward head lines are visible in this picture.

The forward back springs are visible in this picture.

The forward breast lines are visible in this picture.

The forward headline and breast rope are visible in this picture.

Code: WOCH What is the purpose of “fire wires” on an oil tanker and when would they be put out?

They are lines positioned at the bow and at the stern of a tanker in port, for the purpose of towing the ship off the berth in an emergency.

They are quick release wires used in port that can be automatically let go from on board if there is an emergency in the terminal.

They are the control wires that run from the manual control points on deck to remotely start the emergency fire pump.

Code: OBYL What is the meaning of this symbol?

Embarkation ladder.

Davit-launched liferaft.

Lower lifeboat to water.

Evacuation slide.

Code: HQXQ The diagram shows the direction that a rope runs during a mooring operation and a possible place where it may break. Where would be considered the safest position to stand?

Outside the blue coloured zone.

Between the “point of break” and the “firelead”.

Behind the point of restraint, but inside the blue coloured zone.

Inside the blue coloured zone.

Code: JMMT If you detect a fire on board the ship, dependent on the situation, which of the following actions is the first to be taken?

Raise the fire alarm.

Call the officer on duty.

Try to kill the fire immediately by use of fire-extinguishers or other adequate appliances.

Check all nearby compartments for survivors.

Code: DKQF Anyone of the crew who is assigned to watch duties in port has a number of important tasks to carry out. Which one of the listed tasks should be included in the watchman’s duties?

Check the moorings for correct tightness and ensure the gangway remains safe and secure.

Check the safe and secure handling of cargo.

Check the number of persons joining and leaving the vessel.

Check there is always a shore watchman on the jetty.

Code: AIGK What is the main responsibility of a bridge lookout at night?

Inform the bridge of any new lights when they appear over the horizon or any other items observed which may affect the ship.

Inform bridge of changing weather patterns.

Inform bridge of any lights when they appear over the horizon.

Inform bridge of any other ships observed, which appear to be getting closer to your own ship.

Code: RXCL What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Starboard ten”.

Repeat the command back and then turn the wheel to make the rudder turn 10 degrees to starboard of amidships.

Repeat the command back and then put the wheel over sufficiency for the ship to swing at a rate of 10 degrees per minute to starboard.

Repeat the command back and then change course 10 degrees to starboard of present course.

Repeat the command back and then allow the vessel to drift 10 degrees to starboard of original course.

Code: IIES How will you act if you are helmsman and the OOW (officer on watch) gives you the order: “Nothing to port”?

Don’t let the ship turn to port.

Let the ship turn to starboard.

Alter course to starboard.

Don’t give port rudder.

Code: YAVX What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Port 20” and after a while the order: “Ease to 10”?

Apply 20 degrees of rudder towards port and then after the second command reduce the wheel to 10 degrees of helm.

Apply the wheel to alter the course 20 degrees to port and then after the second command change the heading a further 10 degrees.

Change the compass course to a new heading which is 20 degrees to port of original heading and then after the second command reduce it to only 10 degrees to port of original heading.

Turn the wheel until the rate of swing of the ship is 20 degrees per minute and then after the second order, reduce the wheel to make it swing at only 10 degrees per minute.

Code: KWCB Apart from steering the helmsman should also:

Regularly check the gyro against the magnetic compass.

Keep a good lookout.

Regularly check the speed.

Check the visibility.

Code: JKRE How should you, as helmsman, give feedback to the OOW (officer on watch) that his orders are understood?

By repeating the order.

By saying “OK”.

By saying “Yes Sir”.

You don’t have to give any feedback.

Code: ACPG How does low expansion foam act as an extinguishing agent when dealing with oil fires?

By smothering and also by providing some cooling.

By cooling only.

By smothering only.

Code: BRKU In order to extinguish a flammable liquid of the same kind as alcohol, we can use:

Anti-alcohol foam.

Sprayed water.

Water.

Water and foam.

Code: GBCC Monoammonium phosphate used as a dry powder can be effective on what type of fire?

Solid, liquids, and gases.

Solid, liquid, gases and metals.

Metals.

Liquid and gases.

Code: QNVJ When at sea, you discover that the bilges in the engine room have a large quantity of oil residues floating around. What action should you take?

Notify Chief Engineer, find cause of leakage, remedy the leakage and then immediately start to clean the bilges.

Apply foam to the bilges to minimise the risk of fire.

Open the overboard valve and immediately start the bilge pump in order to draw these residues away from the bilges.

Start the fire pump.

Code: VSMF The presence of smoke represents one of the greatest dangers in the fire-fighting. Why?

It reduces the visibility, provokes panic, is irritating and may be toxic.

It only reduces visibility and is very hot.

It hinders communications, causes burns, and provoke panics.

It refrains the equipment from setting out the fire and is irritating.

Code: FDAX Give the meaning of the following symbol:

Heat detector.

Bilge pump.

Foam release station.

Powder installation.

Code: QRVV Wearing an immersion suit when abandon ship is effective permits the person:

To jump from a height of 4,5 m into the water without being injured or damaging the suit.

Not to wear a lifejacket because the suit has sufficient buoyancy.

Not to wear warm clothing because the suit has sufficient insulation.

To climb up and down vertical ropes.

Code: UDLC Which part of the fresh water quantity provided for each person the liferaft is permitted to accommodate may be replaced by a de-salting apparatus?

0,5 l if the de-salting apparatus is capable of producing this quantity in 2 days.

0,5 l if the de-salting apparatus is capable of producing this quantity in 1 days.

0,25 l if the de-salting apparatus is capable of producing this quantity in 1 days.

0,25 l if the de-salting apparatus is capable of producing this quantity in 2 days.

Code: OWFT Which of air and water is the fluid that transfers the greatest amount of heat during the same time, given that the fluid is not flowing along the immersed body?

Water.

Air.

Both are transferring quickly.

Code: ACVX What is the minimum number of lifebuoys carried by a cargo vessel of more than 200 metres in length?

14.

20.

18.

12.

Code: PAQV What safety clothing should be worn during an anchoring operation?

All of the equipment mentioned in the alternative answers.

Boiler suit, working gloves.

Safety goggles.

Safety gloves, safety shoes.

Code: NPLF, RBEN Which one of the following types of rope is the most dangerous to work with?

Nylon.

Manila.

Steel wire.

Polypropylene.

Code: OIPL, MUWD What is the approximate content of oxygen in air?

21 %.

51 %.

11 %.

99 %.

Code: EQAW, HVFL What kind of safety equipment should be in place in connection with a grinding wheel?

Goggles and shield.

Shield.

Welding mask.

Goggles.

Code: KGMX What is the purpose of the Ship Security Plan?

Protect your ship from risks posed by security threats or incidents.

Outline the organizational structure for the ship.

Outline specific measures for your ship to move from security level 1 to 2 and from 2 to 3.

Detail the duties of shipboard personnel assigned security responsibilities.

Code: XCOP What measures should be taken when handling mail?

X-ray or scan parcels before opening them.

Tear open letters with your hands.

Open any mail that looks suspicious.

Wear rubber gloves and protective clothing when opening suspicious looking mail.

Code: CWEU What is the objective of the merchant navy?

To safely transport goods by sea.

To provide employment for persons who wish to become seafarers.

To earn money for the shipowner.

To transport and deliver goods as quickly as possible.

Code: PXVJ What do you understand by “Secure the tug”?

Secure the tug means: to let go the tug.

Secure the tug means: to make fast the tug.

Secure the tug means: to pass a line to the tug.

Secure the tug means: to pick up the tug line.

Code: CWTB What is shown in the picture, a crane or a derrick using what loading gear?

A deck crane using grabs.

A derrick using grabs.

A derrick used as a union purchase.

A deck crane using a bucket loader.

Code: NVNK What do you understand by: “Rig the accommodation ladder in combination with the pilot ladder”?

Rig the accommodation ladder in combination with the pilot ladder means: lower the gangway and rig the pilot ladder from the gangway.

Rig the accommodation ladder in combination with the pilot ladder means: lower the gangway.

Rig the accommodation ladder in combination with the pilot ladder means: lower the accommodation ladder and rig the pilot ladder right next to it.

Rig the accommodation ladder in combination with the pilot ladder means: lower the gangway and rig the pilot ladder forward of the accommodation.

Code: IMXO In the human body, breathing is controlled by:

The bronchia.

The lungs.

The respiratory centre in the brain.

Movement of heart.

Code: WJQC Whenever there is a major bleeding, the first priority should be to:

Stop the bleeding.

Raise an alarm.

Call the doctor.

Take the pulse of the patient.

Code: CYYU When first using cleaning agent in the machinery space, the crew should:

Use it sparingly.

Confirm that it won’t form an emulsion.

Use it liberally.

Confirm that it will form an emulsion.

Code: YUJH During bunker transfer operations, deck scuppers should be:

Plugged to prevent spilled oil flowing overboard.

Plugged when required.

Only fitted to the side of the vessel that bunkers are being loaded.

Attended by crew to collect any spilled oil that approaches.

Code: XXYA Commonly used on an oil tanker, what is another name for a “Combustible Gas Indicator”?

H₂S tester.

Explosimeter.

Oxygen meter.

Inflammeter.

Code: KNAY Which of the following oil products is particularly associated with the danger of contracting leukaemia through exposure to its vapours?

Benzene.

Octene.

Xylene.

Toluene.

Code: YCFI When loading a static accumulator oil, which of the following is a standard precaution applied to eliminate the risk of explosion through electrostatic charge in the tank?

No metallic sampling devices over 2 litres capacity should be permitted on the cargo deck at any time, unless thoroughly cleaned beforehand with soapy water.

No rubber containers over 1 litre capacity, such as those used for sampling, should be introduced into the tank between completion of loading and for 10 minutes after that time.

No metallic devices, such as those used for gauging and sampling, should be introduced into the tank during loading and for 30 minutes after completion of loading.

Code: UPJH What name is given to the part of the discharging operation on an oil tanker when the last remaining contents of a tank or line are being pumped out?

Lifting.

Purging.

Stripping.

Puddling.

Code: RRRL What must be completed before the commencement of any transfer operation on an oil tanker?

The Safety Checklist or Declaration of Inspection.

The Cargo Surveyor’s time sheet.

The log book entries for Immigration and Customs Clearance.

The record of running hours of each cargo pump.

Code: EOHW What name is given to the rotating jet water outlets on a tank-cleaning machine that is used on an oil tanker?

Turbines.

Ejectors.

Nozzles.

Distributors.

Code: NKDO What name is given to the process on an oil tanker, when inert gas is being blown into a cargo tank, to reduce the level of oxygen it contains?

Purging.

Venting.

Gas-freeing.

Blowing.

Code: EODR On the figure there are four (4) possible definitions of the term “ASTERN” shown. Which one is the correct one?

Astern is defined as C on the figure.

Astern is defined as B on the figure.

Astern is defined as D on the figure.

Astern is defined as A on the figure.

Code: TIKJ With reference to the text, what is stated as a threat to lives at sea and the marine environment? Old ships are generally in a worse condition than new ships, though there are also very well maintained ships of 20 and even 30 years old. But the combination of the old, poorly maintained ships and bad management is a threat to both their crew and the environment. Therefore we must do our utmost to prevent dangerous ships from continuing in service.

All old or new ships which are badly managed ships.

All ships aged between twenty and thirty years old.

Bad management and poorly maintained older ships.

There is no immediate threat to the crew or environment.

Code: CYGF Which of the following is a requirement on an oil tanker before personnel enter any enclosed area which contains inert gas generating equipment?

The atmosphere should contain not more than 5 % by volume of explosive and poisonous gases.

The atmosphere should contain at least 5 % oxygen.

The atmosphere should be gas free and contain 20,9 % oxygen.

The oxygen level should be checked with an explosimeter.

Code: YXWW When acting as helmsman would you expect the reading of the gyro compass to be the same as the magnetic compass?

Very seldom would they be the same.

They would always be within 1 or 2 degrees of each other.

They would never be the same.

They would always be the same.

Code: HSTT Hydrocarbon gas encountered in oil tankers cannot burn in an atmosphere containing less than approximately what percentage of oxygen (by volume)?

11 %.

15 %.

13 %.

17 %.

Code: CBTH Where is the acceptable location to smoke while on duty, or working in a cargo deck stowed with containers?

The designated smoking area inside the accommodation or on deck.

Smoke close to an entrance to the cargo deck.

Carefully smoke outside the container stowage area.

There is no smoking allowed while on duty.

Code: EDKO What is the correct location or working station for the deck watchman during cargo operations on an oil tanker?

On the cargo tank deck at all times.

Available somewhere on the weather deck only.

In the cargo control room.

Standing by in the crew mess.

Code: EDCE What do you understand by the term “Slewing”?

Turning or rotating a crane boom.

Hoisting or lowering a load.

Raising or lowering a crane boom.

Making a (travelling) crane move along its rails.

Code: PFDT When an oil tanker is fitted with two slop tanks, how are they commonly referred to?

Primary slop tank and secondary slop tank.

Nominal slop tank and back-up slop tank.

Slop tank (cycle A) and slop tank (cycle B).

Slop tank (settling) and slop tank (decanting).

Code: XKXS When you are on watch during a stay in port, what should you always ensure is ready at the head of the gangway?

Life buoy with line.

Notice board stating the sailing time of the ship.

A telephone to contact shore terminal control.

Notice Board giving name of ship and company.

Code: LSJL What does the abbreviation “OBO” stand for?

Ore Bulk Oil.

Oil Bulk Overall.

Only Bulk Ore.

Ordinary Blend Oil.

Code: KVCC When a vessel arrives at a port to pick up a pilot and enter harbour, there should be someone required to stand by the anchor forward. How should the anchor be prepared and ready?

The brake securely applied, all cement/covering into the chain locker and securing arrangements from windlass removed. The guillotine can remain for removal when ready.

The brake may be insufficient to hold the anchor, so leave everything in place except the cement/covering of the chain locker.

Code: YQPX What is flashpoint of an oil or liquefied gas?

The flash point for an oil or liquefied gas is the temperature at which it is possible to ignite the vapour above the liquid.

The flashpoint is the mixture of oxygen and hydro carbons needed to have an oil or liquefied gas to burn.

The flashpoint is the temperature the oil or liquefied gas need for self ignition.

Code: HUSV What is the main fire fighting medium used for the cargo area of an oil tanker?

Foam.

Carbonic acid.

Dry powder.

Water.

Code: LHND What kind of fixed extinguishing plant is commonly installed in an oil tanker’s pump room?

Dry powder.

Foam.

CO₂.

Water spray.

Code: CCOF Some of the valves in a pipeline system on an oil tanker may be marked with the letters “ESD”. What do these letters stand for?

Emergency Shut Down.

Enabled Slow Down.

Equalising Safety Device.

Emergency Slop Diversion.

Code: MKMI What is commonly recognised as the main hazard associated with unprotected entry into an enclosed space within the cargo area on an oil tanker?

The atmosphere within the space may potentially contain too little oxygen or it may contain toxic vapours.

There may be restrictions on access and mobility within the space.

There are no significant hazards associated with entry into closed spaces on tankers.

Code: JQCH What are the duties of the bridge lookout during the night, when the vessel is in the middle of the ocean?

The lookout must keep a lookout all-round the ship and report anything sighted, or heard, to the Officer of the Watch.

The lookout must keep a lookout ahead of the vessel and report anything sighted to the Officer of the Watch.

The lookout should remain on the bridge wing to be at hand to deliver messages as required by the Officer of the Watch.

Code: QMXA Why could dirty and oily areas of the deck be dangerous?

They may cause people to slip over and hurt themselves.

They show the ship is not efficient.

They are areas which should be cleaned up.

They do not look good to the customers.

Code: FNCM What is understood by the term “Boat Drill”?

“Boat Drill” is an exercise to launch the lifeboats and move the boats clear of the ship.

“Boat Drill” is an exercise in the practical and safe methods to secure a boat alongside the ship.

“Boat Drill” means the practical training in the various aspects of getting all the people onboard safely off the ship, in the event of abandoning ship.

“Boat Drill” means an exercise in the safe methods of handling a lifeboat in heavy seas.

Code: NOAH The passage of electrical current through the body may result in severe and sometimes fatal injuries. You are witness to man getting electric current through his body and is stuck to the dangerous area. It is impossible to switch off the current by any main switch. How to break the current safely?

Stand on dry insulating material and pull the person away with isolating material.

Call the electrician immediately.

Apply fish oil on your hands and cut the cords by the use of any metallic pliers.

Code: GKYL What is the correct way that the lookout should report the appearance of a light, in clear visibility, on the port side of the ship in a direction half way between right ahead and abeam?

The lookout should state “Light 4 points to port”.

The lookout should state “Ship seen to port”.

The lookout should state “Ship observed 45 degrees to port”.

The lookout should state “Light on the port bow”.

Code: YEYS Is the act of piracy at sea an increasing or decreasing problem?

Piracy is increasing.

Piracy is not a problem.

Piracy has remained constant for the last 50 years.

Piracy is decreasing.

Code: WFYY Which of the following may cause a fire in the accommodation spaces?

All the mentioned alternatives.

Smoking in bed.

Overloading electric plugs.

Covering electric heaters with blankets.

Code: SVBG Proteinic foams have the feature of being:

Of low expansion, not easily contaminated by hydrocarbons.

Of high expansion, not easily contaminated by hydrocarbons.

Of high expansion, made of tense-active compounds.

Of low expansion, viscous and solid, easily contaminated by hydrocarbons.

Code: TGWD We must clean the spots of oil on hot surfaces because:

All the answers are correct.

They cause fires.

They give off vapours.

They imply uncleanness.

Code: NTBL The main risk for people when using CO₂ as an extinguishing agent in a closed space is:

Air suppression.

Toxicity.

Reduction of visibility.

Low temperature at the nozzle.

Code: XDIW Before extinction of an electric fire we need:

To disconnect the power source.

To know the voltage and wear rubber gloves.

To confine the area involved in the fire.

To put out the fire without taking any special measures.

Code: YLDC Give the meaning of the following symbol:

Portable foam applicator.

Portable fire extinguisher.

Powder installation.

Foam installation.

Code: YNEO The stability and strength of a liferaft when loaded with its full complement of persons and equipment is such that it can be towed in calm water at speeds of up to:

3 knots.

1 knot.

5 knots.

10 knots.

Code: SERD A person wearing an anti-exposure suit shall be able to:

Perform all duties associated with abandonment, assist others and operate a rescue boat.

Dive into the water to the maximum draft of craft that the ship is provided with.

Don and remove the suit in the water in no more that 5 min if it impairs ability to swim.

Jump from a height equal to that of the stowage of liferafts arranged to be thrown overboard.

Code: DAPI What is the general emergency alarm signal as specified in SOLAS?

Seven or more short blasts followed by one long blast.

Continuous ringing of the alarm bells.

One long blast followed by six short blasts.

Six or more blasts followed by one long blast.

Code: DIEP What special safety measures are required by a seaman when working aloft on a stage?

Safety harness with a rope secured to a safe point above.

No special safety measures required.

A safety harness secure to the stage.

Helmet, safety shoes and gloves.

Code: LAWB, PQBN What method shall be used when hauling survivors out of the sea (state of survivors is critical)?

Using nets.

Using lifebuoy.

Using heaving line.

Using painter.

Code: ACYL, RLBC What should be carried out before entering the pump room?

Always carry a walkie talkie with you into the pump room and call for help immediately if you start feeling dizzy.

Notify the Chief Officer or officer on duty.

Notify the Chief Officer or officer on duty and run the ventillation for at least 15 minutes.

Run the ventilation for at least 15 minutes.

Code: MDRU Which of the following areas may be possible restricted areas? Review all answers.

The Bridge.

The Cargo control room.

The Engine control room.

All alternatives.

Code: FNDY What general background colour is used on warning signs that indicate emergency or first-aid features, or indicate a safe condition?

Blue.

Yellow.

Red.

Green.

Code: OIEA Is it always possible to use the word “ship” instead of the word “boat”?

A boat can only be used for vessels under 50 metres in length.

Either can be used anytime.

Normally a small vessel is called a “boat” rather than a “ship”, otherwise it is not important.

Code: TCOT What is the room often called where the crew eat their meal?

The crew cafe.

The crew mess.

The crew galley.

The crew restaurant.

Code: GXMX What do you understand by the term “Let go the tug”?

To cast off the lines that secure the tug to the ship.

To tell the tug master to go away.

To cut the lines securing the tug to the ship.

To take no notice of the tug.

Code: YQTG What would you do if you saw a person falling overboard?

If I saw a person falling overboard I would inform the Bosun.

If I saw a person falling overboard I would run to the Bridge.

If I saw a person falling overboard I would shout repeatedly, “Man overboard”.

If I saw a person falling overboard I would shout once, “Man overboard”.

Code: EXJL If a casualty has no pulse, the first aider must immediately:

Start heart compression and artificial respiration.

Inform the next of kin.

Raise an alarm for help.

Do nothing as the patient is already dead.

Code: BXPW To control bleeding, a tourniquet should be applied:

Whenever it is possible to stop bleeding.

Only on Radio medical advice.

Only when all other means have failed.

Whenever you have to transport the casualty.

Code: YLMY When is it good practice to check the pressure-vacuum valves?

Prior to cargo transfer.

After cargo transfer operations.

Before the next dry-docking.

During cargo transfer operations.

Code: UBPI The cargo manifold working platform surface should be made of:

Wooden laminate.

Perforated steel sheet.

Chequer plate.

Open mesh grating.

Code: GMAN Commonly used on an oil tanker, what does an “Explosimeter” measure?

The composition of hydrocarbon gas/air mixtures in a tank atmosphere.

The amount of H₂S gas in a tank atmosphere.

The level of oxygen present within a tank.

The relative amounts of nitrogen and combustible gases within a tank.

Code: LAYJ What will you do when all the fresh water in the survival craft is finished or about to finish?

Use sea water to keep your body wet.

Start collecting rain water.

Drink sea water.

Drink only 1 liter of sea water per day.

Code: EJKJ What name is given to the process of discharging water from a designated slop tank on an oil tanker while minimising the disturbance of the oil layer on top, with the objective of removing as much water as possible?

Deballasting.

Decanting.

De-layering.

Discharging.

Code: SCJM How might a leak from a cargo tank on an oil tanker be readily detected during the voyage?

By regularly monitoring the vessel’s trim on the cargo computer – any cargo that leaks will run to the end of a compartment, resulting in an increase in trim.

By regularly monitoring void and ballast spaces, such as by testing them for hydrocarbon content and sounding them.

By occasionally opening a selected tank and manually measuring the cargo ullage, then comparing it to the “after loading” reading.

By frequently monitoring cargo level equipment readouts and comparing them to the load port departure readings.

Code: DSIQ When reeving a new wire onto a self-stowing winch drum you should, after looking at brake arrangement, reeve it to pay out as follows:

Direction A.

Either direction is acceptable.

Direction B.

Depends on the direction of the lay of the wire strands in the new wire.

Code: OWGN “Overshoot” is an expression related to a ship’s steering ability. What is the correct understanding of this expression?

It is how many degrees a ship continues to turn after you apply counter-rudder.

It is the way a ship turns when you put the helm in a hard over position.

It is the way a ship shoots forward when you give “a kick ahead”.

It is the way a ship continues to turn when the helm is put amidship.

Code: WTWR Read the text in the diagram and answer this question: What should be given to prospective seafarers? It is recommended that every prospective seafarer should, before being employed in a sea-going ship, receive proper training in personal survival techniques. In respect of such training several recommendations are made.

Approved training.

Protecting clothing.

Passport and visa.

Traveller’s cheques.

Code: WNDB Read the text in the diagram and answer the following question: When should training in personal survival techniques be given? It is recommended that every prospective seafarer should, before being employed in a sea-going ship, receive proper training in personal survival techniques. In respect of such training several recommendations are made.

After one period at sea.

During the first week on board.

After joining the ship.

Before being employed.

After one period at sea.

During the first week on board.

After joining the ship.

Code: TCQW What does the term “Hard a Starboard” or “Hard to Starboard” mean?

The wheel is difficult to turn to starboard.

Do not allow the vessel to swing to port.

Put the wheel fully over to starboard.

Start the ship swinging to starboard.

Code: DTIR If you have to carry out hot work close to a smoke detector in the engine room, what precautions should be taken?

Notify Master, Deck officer and Engineer in charge.The loop for this special sensor to be switched off and take normal precautions for hot work.

No special precautions except for having a watch man and a fire extinguisher available.

Disconnect the smoke detector.

Notify deck officer in charge that a fire alarm may occur.

Code: OSDQ Who is authorised to operate lifting equipment around the ship?

Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the procedures as outlined in the ship’s SMS system.

All deck officers and ratings and selected engine room personnel.

Stevedores, manufacturer’s maintenance engineers and senior ratings only.

Code: NJBT What does SBT mean?

Safely ballast trading.

Special ballast tanker.

Sensitive ballast trading.

Segregated ballast tanker.

Code: GSXA When handling slops on an oil tanker, what is meant by “settling”?

Allowing the oil and water to separate out.

Allowing any waxy layers to settle below the residual oil.

Allowing the mixture to rest once it has been pumped into the slop tank, so that any static charge disperses.

Allowing any sediment to separate out and drop to the bottom of the tank.

Code: VTOD When disconnecting the cargo hose after discharging, some oil is drained into the drip- tray under the manifold which already contains a small amount of dirty water. What is the correct way to dispose of this oil?

Transfer it to the sloptank and later discharge it to a reception facility.

Drain overboard when the vessel is 50 nautical miles off the coast.

Mix in an appropriate quantity of dispersant chemicals and drain it overboard when in open water.

Drain it to a cargo tank.

Code: LASX You are on an oil tanker which is loading at a Single Point Mooring and you are the Deck Rating on duty. Which of the following areas of the ship will you monitor continuously throughout your watch?

Accommodation ladder/radio station/poopdeck.

Forecastle head/manifolds/main deck.

Pump room/engine room/cargo control room.

Bridge/cargo control room/poopdeck.

Code: HMSW Why is an Inert Gas system used during a Crude Oil Washing operation?

To ensure a safe atmosphere in the cargo tank throughout the operation.

To build up internal pressure and so increase the pumping rate.

To protect the condition of the steel structure of the tank.

By introducing Inert Gas bubbles into the oil, the build up of sediment is kept at a minimum.

Code: JFFD What is the correct understanding of the term “LEE SIDE”?

The lee side is the side of the ship which is facing away from the wind.

The lee side is the side of the ship which is facing into the wind.

The lee side is the starboard side of the vessel.

The lee side is the side of the ship alongside the quay or jetty.

Code: VCIB, VNFH What is the meaning of this symbol?

Survival craft pyrotechnic distress signals.

Rocket parachute flares.

Line-throwing appliance.

Radar transponder.

Code: JTBC What class of fire is a smouldering fire of wood, textiles, paper and other carbonaceous materials?

Class A.

Class B.

Class C.

Class D.

Code: GRPI If the relief for the bridge lookout does not appear at the end of the watch, when required, what should be the actions of the existing lookout:

He should inform the Officer of the Watch and wait for instructions.

The lookout should go down the accommodation to see where the relief is and make him/her go to the lookout position.

Inform the Officer of the Watch that you are going to call your relief.

Code: WCRQ How is a EPIRB (Emergency Position Indicating Radio Beacon) activated?

Most EPIRBs are remotely activated from the ship.

The EPIRB is always transmitting and does not need to be activated.

Most EPIRBs are automatically activated when they enter the water.

Most EPIRBs must be manually switched on.

Code: VPHS During restricted visibility, you are posted as bridge lookout and you hear 1 long blast at intervals of about 2 minutes on your port bow. What will you report to the OOW (officer on watch)?

Power driven vessel under way and making way on the port bow.

Fog signal of one long blast heard on the port bow.

A vessel at anchor on port bow.

Power-driven vessel making no way on port bow.

Code: RKSY If you are the helmsman on duty, what would be the correct action if the OOW (officer on watch) gives you the order to: “Change over from Automatic pilot to Hand steering”.

Apply the controls to disconnect the Automatic pilot and engage hand steering. Start steering the vessel using the wheel and confirm with the OOW the change-over is complete and the course you are to steer.

Standby the wheel and wait for the OOW to apply the appropriate controls to change from Automatic pilot to hand steering.

Apply the appropriate controls to disconnect the Automatic pilot and engage hand steering. Start manually steering the same course as was being steered by the automatic pilot.

Ask the OOW what course you are to steer and standby the wheel. Tell the OOW you are ready for changing over.

Code: BWLW As a general rule, what is the minimum flash point of an oil used as a liquid fuel on board?

30 °C.

60 °C.

10 °C.

There is no limit.

Code: KLOY Which one of the following is a limitation on the use of chemical powders?

In some cases they may cause a violent reaction on combustible metals such as sodium.

All the below mentioned alternatives.

Some of them may give off NH₃.

They may put an insulating deposit on electronic equipment.

Code: UCDU The extinguishing agent which can be applied on any fires of class A, B or C is:

CO₂.

Sprayed water.

Multipurpose powder.

Halon.

Code: JQYS Which of the following measures should be applied when hot work is to be undertaken in a harbour?

All the answers are good.

To maintain a permanent fire watch of at least four persons.

To use only intrinsically safe equipment in the area where hot-work is performed.

To have a hot-work permit.

Code: RARK, TDWO As a fire fighter, what should you always consider when fighting a fire in a confined space?

The confined space has only four sides.

The confined space has only five sides.

The confined space always has six sides.

The confined space can be considered to have one side only as heat always rises.

Code: KSWJ What is the main characteristic of the weak link in a float-free arrangement for inflatable liferafts?

Be of sufficient strength to permit to pull the painter from the container and the inflation of the liferaft.

Be of sufficient strength to break at a depth of at least 4 m and release the liferaft from its berth.

Be of such a strength to be cut by any person with a jack-knife.

Be of sufficient strength to keep the liferaft alongside the ship when dragged at a maximum speed of 3 knots.

Code: AKRT A lifejacket is so constructed that a person can correctly don it within a period of:

2 min.

10 sec.

30 sec.

1 min.

Code: QMYC In which way shall a survivor be hauled out of the sea?

Horizontal.

Vertical.

In 45 degree angle.

None of the above.

Code: NGPM An inflatable lifejacket will inflate:

Either automatically on immersion or by a single manual motion.

Automatically on immersion.

Either automatically on immersion or by a single manual motion or by mouth.

Either automatically on immersion or by mouth.

Code: SYSO The breaking strength of the painter in a liferaft permitted to accommodate 15 persons is at least:

7,5 kN.

5 kN.

2,5 kN.

10 kN.

Code: NNPQ The responsibility for safety and security rests with everybody on board the vessel. General house-keeping rules should be followed. Which of the listed rules is the most important?

Keep your working area clean and tidy.

Keep tools within easy reach during work.

Do not carry lighters or matches when working outdoors.

Always use gloves when using grinding machines.

Code: MHPB Welding and burning are among the factors which give the highest risk of fire on board ships. Precaution has to be taken to avoid this risk. Which of the following safety rules may be regarded as the most important?

The welder shall have been instructed in the use of the ships welding plant.

Electric welding plants shall be controlled by a responsible engineer before use.

Only holders of welding certificates shall be allowed to carry out welding on board ships.

Only use electrodes from a well-known manufacturer.

Code: QQNT Which of these types of information is considered sensitive?

Ship schematic and HR policies.

Planned maintenance schedule and emergency response procedures.

Voyage itinerary and departure and arrival times.

Way points and training records.

Code: IELO This device can detect a package of drugs inside a large delivery of ship’s stores. What is it?

Pallet scanner.

Vapour detector.

Security container.

Access control system.

Code: PEBE What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?

The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Wide step”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.

Code: OVFY What do you understand by “Bitter end”?

The end link of an anchor cable that is secured within the chain locker.

The toggled end of a lifeboat painter.

To the very last moment.

A foul taste at the end of a meal.

Code: HJKO You must not attempt to move a casualty carelessly, if you suspect patient with:

Sleeping.

Consumed excess alcohol.

Fractured spine.

Unconscious.

Code: CYYU When first using cleaning agent in the machinery space, the crew should:

Confirm that it won’t form an emulsion.

Use it sparingly.

Use it liberally.

Confirm that it will form an emulsion.

Code: YRWB In terms of cargo operation on an oil tanker, what is “topping off”?

Commencing discharge from another tank, to retain suction, when stripping a tank.

Filling a cargo tank to its maximum level without causing an overflow.

Completing the loading of a tank to the required ullage.

Slow pumping a cargo tank at the commencement of discharge, to achieve a safe ullage, before starting discharge from other tanks.

Code: JEDB Some oil cargoes contain high levels of a chemical called Hydrogen Sulphide, or H₂S. The atmosphere on deck may be monitored if you are loading such a cargo and an alarm may sound if the level of H₂S vapour around the deck becomes unsafe. Each company and terminal will have procedures, but, in general, which of the following describes the procedure that you, as a deck watchman, should follow if this happens?

Put on any Emergency Escape Breathing Device with which you have been issued, leave the area immediately, moving in an upwind direction, report the situation to the Cargo Control Room.

Remain exactly where you are but report the alarm to the Duty officer immediately.

Code: JQYB What class of fire involves gas?

Class D fire.

Class C fire.

Class B fire.

Class A fire.

Code: TUKT Which of the following best describes the atmosphere in the space above an oil cargo in a tank that has been filled with Inert Gas?

The atmosphere within the tank contains insufficient oxygen to support the combustion of hydrocarbons.

The atmosphere within the tank contains carbon dioxide at a concentration above 79 % by volume.

The atmosphere within the tank contains between 20,9 % and 17,5 % oxygen by volume.

Code: BHUW, PRQS What is the necessary protection when you are rust chipping with air tools?

Gloves, goggles, earmuffs.

Protective clothing, safety shoes, earmuffs.

Goggles and ear protectors.

Protective clothing, safety shoes, gloves, goggles, earmuffs.

Code: YQTK What is the first think you are doing when having a lifeboat drill?

Put on the life jacket.

Swing out the davit.

Wait for order.

Enter the lifeboat.

Code: GSXA When handling slops on an oil tanker, what is meant by “settling”?

Allowing the oil and water to separate out.

Allowing any waxy layers to settle below the residual oil.

Allowing the mixture to rest once it has been pumped into the slop tank, so that any static charge disperses.

Allowing any sediment to separate out and drop to the bottom of the tank.

Code: HMSW Why is an Inert Gas system used during a Crude Oil Washing operation?

To ensure a safe atmosphere in the cargo tank throughout the operation.

To build up internal pressure and so increase the pumping rate.

To protect the condition of the steel structure of the tank.

Code: NFVF What is meant by the term “Single up” when a vessel is preparing to leave the jetty to which it was moored?

Single up is the term used to describe the process of letting go most of the moorings lines and just leaving sufficient lines to stay safely alongside.

Single up is the term used when only one single tug is used to assist the ship in leaving the berth.

Singe up is the term used when there is only one single rope left out between the ship and the jetty, when leaving the berth.

Code: BUFM What is a contingency plan for ships?

Loading plan for general cargo.

Plan for next voyage.

Plan for maintenance and repair.

Plan for safety preparedness.

Code: MAOX, NRCQ Which one of the listed fire-extinguishing medium is to be preferred to fight a fire in an electric installation (for example the main switchboard)?

Powder.

Water fog.

Sprinkler.

Foam.

Code: LVXI The aim of fire detection is:

All the answers are correct.

To begin applying an emergency plan.

To discover where a fire starts.

To activate the alarm.

Code: QGIV Which of the following is a combustion reaction?

Open fire.

Smouldering fire.

All the answers are good.

Explosion.

Code: NBOJ In a liquid fire the surface of which is about 100 m?

Flames are usually higher than the diameter of the fire.

The radiated heat can spread to exposures placed 100 m away.

The radiated heat is lower than the conducted heat.

The radiated heat can spread to exposures placed 200 m away.

Code: CUBK What are the components of the personal equipment of the fireman’s outfit?

All the items mentioned.

Boots and gloves of rubber.

Protective clothing to protect the skin from heat, burns and scalding.

A rigid helmet, an electric safety lamp and an axe.

Code: LIYJ If conditions permit, which is the best way to board a liferaft that is floating close to the ship?

Jump onto the raft itself.

Jump into the water close to the raft, without a lifejacket, as this will make it easier to swim and board the liferaft.

Use a rope ladder close to the raft to climb down and board.

Wearing a lifejacket, jump into the water close to the raft and then swim to it.

Code: IKNO A person wearing a thermal protective aid shall be able:

To wear a lifejacket inside.

To climb up and down a vertical ladder.

To jump into the water from a height of 4,5 m.

Wearing a lifejacket, jump into the water close to the raft and then swim to it.

Code: OMGR How many rocket parachute flares are carried in each liferaft with SOLAS B pack?

12.

Nil.

Code: KEAO How much liferaft capacity should be provided on a conventional cargo ship of more than 85 meters in length?

100 % of the complement if it can be readily launched on either side of the ship. If it cannot be readily launched on either side, 100 % must be provided on each side.

75 % of the complement on each side of the ship.

25 % of the complement on each side of the ship.

50 % of the complement on each side of the ship.

Code: LTQR The minimum number of lifebuoys required on a cargo ship depends on:

The length of the ship.

The tonnage of the ship.

The number of persons on board.

The sea area in which the ship is allowed to sail.

Code: HLWF What precautions must be taken before entering an enclosed space?

Gas readings taken, and when deemed to be all right, personnel issued with rescue harnesses.

Rescue harness in place, oxygen level measured, communications set up, crewmember in vicinity.

Space thoroughly ventilated, oxygen and gas readings taken, communication set up, permit to work completed, crewmember standing by, with rescue gear.

Code: VRGW Under what circumstances should gangway nets be rigged under the gangway?

Whenever the gangway is rigged between ship and shore.

A gangway net is only required to be rigged when required by the port regulations.

When instructed by the Master or the Chief Officer.

Whenever the ship is moving slightly back and forth along the quay due to wind and current.

Code: EEAE, IYEL What is the minimum distance between the helmet and the head of the wearer supposed to be?

3 cm.

7,5 cm.

1 cm.

No minimum distance.

Code: QWIA Which type of equipment can be used to detect explosives?

Particulate detector.

Metal detector.

CCTV.

Water cannon.

Code: KYVF If your ship is in the tropics and you are going to be working out on deck during the day, what is the recommended daily intake of water for you to avoid the effects of dehydration?

1 litre.

10 litres.

4,5 litres.

Drinking water is not the solution. I must consume at least 250 mg of salt per day to retain body fluid.

Code: CNMN The bones in the human body are connected to each other by:

Different type of joints.

Muscles.

Tendons.

Fibrous tissues.

Code: QKMA Which statement about the garbage record book is true?

It is used to record all operational and accidental garbage discharges.

Each entry is to be signed by the Master.

It is required by all ships on International voyage.

Each entry is to be written in the language of the ship’s flag state.

Code: KXNU On oil tankers, what is generally used to control the safety of the atmosphere in the cargo tanks?

Water.

Nitrogen.

Hydrogen Sulphide.

Inert Gas.

Code: TVWK What is the correct understanding of the term “Bottlescrew”?

A bottlescrew is a metal threaded sleeve which adjust the length and tension on rigging or stays.

A bottlescrew is the special wire rope used to lash containers.

A bottlescrew is the threaded screw used to open large bottles.

A bottlescrew is the connection ring on this ships deck used to connect lashings and rigging.

Code: AWWH What are the duties of an effective bridge look out?

Keeping a constant observation around the ship.

All of the alternatives specified.

Keep a lookout for other ships; navigation lights and any other dangers which may have no lights.

Ensure there is always a bridge lookout on duty and only leave the lookout when given permission.

Code: GAQJ What is the meaning of the term “Steady as she goes” when acting as helmsman?

Keep the applied rudder constant until the next helm order.

Try to reduce the continuous swinging either side of the course when steering a compass course.

While altering the ships head, the instruction “steady as she goes” means reduce the ships swing as rapidly as possible and steady on present course.

Reduce the number of helm movements used when steering a set course.

Code: FCNJ When having a fire alarm during normal working hours, what immediate actions should be taken?

Act according to instruction given in the fire plan.

Start the fire pump, the sooner the better.

Everybody gather in the safety centre.

Start searching for the fire to determine if it is in the engine room.

Code: GFPU What is a “cargo plan” when applied to a ship?

The plan showing the cargo spaces and their capacity.

A discussion between the shore and ship to plan the procedure for loading cargo.

The plan to show the staff requirements at each hatch while the ship is loading cargo.

The plan indicating where cargo is to be loaded and in what quantities.

Code: CIAG What kind of safety equipment must be worn during anchoring?

All of the mentioned equipment.

Safety goggles.

Safety helmet, safety shoes.

Boiler suit, working gloves.

Code: KWCB Apart from steering the helmsman should also:

Keep a good lookout.

Regularly check the speed.

Check the visibility.

Regularly check the gyro against the magnetic compass.

Code: PRRL In which ways is heat transmitted?

Conduction, convection and radiation.

Delay, conduction, radiation.

Gasification, conduction and convection.

Radiation and gasification.

Code: MUNT If a fire starts in the fuel tanks of a vessel, the fire will be:

A Class B fire.

A Class E fire.

A Class D fire.

A Class A fire.

Code: KMVP The pressure in a flexible fire hose must be set up:

All answers are correct.

While it is being laid down.

Before it is being laid down.

After it has been laid down.

Code: MVQI You are carrying out a search in a smoke filled room, wearing a breathing apparatus. How would you conduct this search?

Carry out a right or left hand search and proceed carefully, feeling the area in front with the foot and using the back of the free hand to check the area around.

As soon as you enter carry out a right or left hand search by placing the appropriate hand onto the bulkhead and then follow the bulkhead round as quickly as possible.

Proceed to the approximate centre of the room and then carry out the search on a circular pattern.

Proceed straight ahead to the far bulkhead and then carry out a left or right hand search as appropriate.

Code: HFMT Which part of the float-free arrangement for inflatable liferafts is made to provide a connection between the ship and the liferaft?

The hydrostatic release unit.

The weak link.

The painter.

The lashing strap.

Code: GTQE The grabline of a lifebuoy has a length of:

5 times the outer diameter of the lifebuoy.

2 times the outer diameter of the lifebuoy.

3 times the outer diameter of the lifebuoy.

4 times the outer diameter of the lifebuoy.

Code: QNVP How many thermal protective aids are carried in each liferaft?

10 % of the number of persons the liferaft is designed to carry, or two, whichever is more.

Nil.

Code: ACXK A lifebuoy light is capable of working at minimum for a period of, and has a luminous intensity of:

2 h, 2 candelas (about 1,7 mile range at normal meteorological sight).

4 h, 1 candela (about 1,0 mile range at normal meteorological sight).

4 h, 2 candelas (about 1,7 mile range at normal meteorological sight).

4 h, 1 candela (about 1,0 mile range at normal meteorological sight).

Code: AGCP What types of fire extinguishers shall be used in the engine room?

Fire extinguishers equipped for powder or CO₂ only.

Any fire extinguisher with a weight of less than 100 lbs.

Fire extinguishers filled with fresh water only.

Fire extinguishers of the handy-size types only.

Code: VNWE What items of clothing should be avoided during mooring operations?

Loose necklaces and chains round the neck.

All of the items specified in the alternative answers.

Boiler suits with wide loose sleeves.

Rings on the fingers or thumbs.

Code: KECH, MSJT What kind of permits have to be obtained before starting cold work in tanks?

Cold work permit.

Hot + cold work permit.

Cold work permit + permit to entry.

Hot work permit.

Code: CJHL One of the checks during the annual Class survey of the UMS functions is focusing on cleanliness of the engine room. What is the reason for such a check?

To prevent risk of pollution.

To reduce the general risk of fire in an unmanned engine room.

To have the engine room looking tidy.

To avoid frequent alarms.

Code: OWWM Which of these procedures should crew follow when conducting a search?

Stand quietly in various spots around the space listening for unusual sounds like the tick tock a clock mechanism.

Search the perimeter of the space up to a height of 5 feet.

Wait in the area they’ve finished searching until they’re contacted for a status update.

Conduct random or spot checks of logical threat areas.

Code: YPYM Which of these are indications that a parcel is suspicious?

The parcel is addressed to no one in particular, arrives unexpectedly and seems heavy for its size.

The parcel smells like chocolate.

The parcel is wrapped in clean, brown paper and is addressed to a crewmember from his wife.

The parcel came from Joe in the safety department and arrived quicker than expected.

Code: KLAP What is the meaning of “Make fast”?

Make fast means to avoid all meals.

Make fast means to act very quickly.

Make fast means to coil a rope.

Make fast means to secure a rope.

Code: NHUU The upper airway consists of:

Mouth, throat and lungs.

Mouth, nose and throat.

Mouth, nose and lungs.

Mouth, throat and trachea.

Code: JLSA The oil spill removal equipment store must be:

A store room in the forward part of the ship.

Just off the main engine room.

Prominently marked and easily accessible.

Code: UVWF Which of the following statements describes a “closed discharge” operation on an oil tanker?

A discharge operation carried out without opening any lids or sighting ports and where gauging is performed either by a fixed system or by a portable system gaining access through a vapour-lock..

A discharge operation which is commenced with all manifold and tank valves on the vessel initially set in the closed position.

The pumping of tank washings, conducted through underwater discharge outlets only.

Code: OGIS There is an “industry standard” book, found on oil tankers, which explains all about oil cargo and cleaning operations and their associated hazards. What is it called?

The International Safety Guide for Oil Tankers and Terminals (ISGOTT).

The International Safety Management Code (ISM).

The International Convention for Prevention of Pollution from Ships (MARPOL).

Code: JQFQ When could there be a demonstration of how to start a lifeboat engine?

A demonstration could be arranged during a lifeboat drill.

There is an instruction card inside the lifeboat showing how to start the engine.

A demonstration is not necessary, because there are a limited number of persons who given the responsibility for starting the lifeboat engine.

Starting the lifeboat engine is very easy and there does not need to be any demonstration.

Code: CFWG What is the industry standard requirement for connecting a flanged cargo hose?

A bolt in every hole.

A bolt in every alternate hole.

Enough bolts to prevent any leakage.

4 bolts, arranged as two pairs, diagonally across.

Code: SSWK Which of the following inert gas systems on oil tankers use gases only from the ship’s main or auxiliary boilers?

The flue gas plant.

Nitrogen generator.

Combination – inert system.

The independent inert gas generator.

Code: IIHE When connecting the loading/discharging hoses/arms prior to cargo operations on an oil tanker, it is quite common that a reducer is required. What is the name given to the part of the ship’s pipeline onto which the reducer is fitted?

Presentation flange.

Open flange.

Discharge coupling.

Manifold valve face.

Code: BAIH On the figure 4 possible definitions of the term “QUAY” are given. Which one is the correct one?

Quay is given by A on the figure.

Quay is given by B on the figure.

Quay is given by C on the figure.

Quay is given by D on the figure.

Code: PAOY What is the normal name of the waterproof suit shown in the picture?

Survival suit.

Wet suit.

Fluorescent orange suit.

Life suit.

Code: BSHD, OCYK A class D fire involves what type of material?

Metals.

Gases.

Wood or other carbonaceous material.

Liquids.

Code: JPPA What is meant by the term “keeping a proper lookout” as applied to the bridge lookout?

Keeping a visual lookout all round the ship and also actively listening out for audio signals.

Keeping a very visual lookout ahead and abeam of the ship.

Continually visually scanning the horizon all round the ship.

Keeping a visual lookout all round the vessel.

Code: YAVX What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Port 20” and after a while the order “Ease to 10”?

Apply 20 degrees of rudder towards port and then after the second command reduce the wheel to 10 degrees of helm.

Keeping a very visual lookout ahead and abeam of the ship.

Continually visually scanning the horizon all round the ship.

Keeping a visual lookout all round the vessel.

Code: EECH The duty engineer of a UMS ship is approached by a member of the ship’s staff, seeking permission to hang wet working clothes in the engine room to dry. He should:

Not allow the clothes to be hung anywhere in the unmanned machinery spaces.

Allow the clothes to be hung over rail next to the warm FO service tanks.

Allow the clothes to be hung over a rail anywhere.

Allow the clothes to be hung over a rail provided there is no electrical equipment directly below.

Code: GVYK What is the name given to a devastating explosion that may occur when a rigid container containing a liquefied gas is exposed to a very high temperature?

BLEVE.

SLOP-OVER.

FLASH-OVER.

BOIL-OVER.

Code: TXMD What is the minimum volume of air contained in the cylinders of a SOLAS compliant self-contained compressed-air operated breathing apparatus (SCABA)?

1 200 litres.

1 800 litres.

1 000 litres.

2 500 litres.

Code: ICWU Give the meaning of the following symbol:

Remote controlled fire pumps.

Hose box.

Foam release station.

Powder handgun.

Code: RYYY A floating liferaft is capable of withstanding repeated jumps on to it from a height of at least:

4,5 m.

3,5 m.

Foam release station.

Powder handgun.

Code: VGWV The minimum number of lifebuoys required for a passenger ship cannot be less than:

10.

Code: CXMC The responsibility for safety and security rests with everybody on board the vessel. General house-keeping rules should be followed. Which of the listed rules is the most important?

Do not use loose garments, belts, ties or scarfs near winches and moving machinery.

Always use gloves when handling nylon ropes.

Always use protective working shoes when working outdoors.

Always use gloves when using grinding machines.

Code: CHXS What kind of foot wear should be used when working on deck and in the engine room?

Safety shoes or safety boots.

Sandals or plimsolls.

Tennis shoes.

Rubber boots.

Code: KGMX What is the purpose of the Ship Security Plan?

Protect your ship from risks posed by security threats or incidents.

Outline the organizational structure for the ship.

Outline specific measures for your ship to move from security level 1 to 2 and from 2 to 3.

Detail the duties of shipboard personnel assigned security responsibilities.

Code: PEBE What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?

The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Wide step”.

Code: DSFJ What is the normal term used for the regular training of how to launch the lifeboat?

Lifeboat drill.

Lifeboat exercise.

Lifeboat practice.

Lifeboat launching.

Code: RVTQ An unconscious casualty who is breathing, should be placed:

In the recovery position.

Lying face down position.

Sitting up position.

In the face up position.

Code: DPIF What is the most important treatment concerning a foreign body in the eye?

Keep the eye closed.

Rinsing of the eye with water

Local anaesthetic.

Wring the eye-lid to prevent blinking.

Code: CGPV Which of the following is part of the spill response equipment inventory?

Hand cleaner.

Sorbents.

The pressure washer.

Chipping goggles.

Code: QLQM When talking about the properties of an oil cargo, what does “flammable” mean?

That it is not capable of burning.

That it does not need an external ignition source to cause it to burn. It will do so by itself.

That it is capable of being ignited and burning.

When it catches fire, flames may be seen, as well as smoke.

Remain exactly where you are but report the alarm to the Duty officer immediately.

Put on any Emergency Escape Breathing Device with which you have been issued, leave the area immediately, moving in an upwind direction, report the situation to the Cargo Control Room.

Code: TRQA When keeping a lookout, what would be the correct understanding of the question “What is the aspect of the other ship”?

The question is requesting some indication of the direction the other ship is heading.

The question is requesting some idea of how far away the other ship is from your own ship.

The question is requesting where on the horizon the other ship was sighted.

The question wants to know what type of ship has been sighted.

Code: TNOX What is the inherent danger in welding/cutting in piping containing freon?

Development of explosive gases.

Development of nitrous gases.

Depletion of oxygen in the air.

Depletion of the ozone layer.

Code: ELPO When two ships are lying alongside each other in a ship to ship operation and one ship is lying at anchor, anchor watch duties must be carried out as follows:

Both ships have normal anchor watch responsibility in addition to watching ship to ship fendering, mooring etc.

Anchor watches are not kept as the duty officers will be on deck conducting the cargo operations.

Anchor watch responsibility rests with the vessel which has its anchor down and the ship to ship connections is the responsibility of the other vessel.

Anchor watch responsibility rests with the discharging vessel which would be the vessel which is anchored.

Code: QCCO This is a standard item of equipment on an oil tanker, but what does the abbreviation “ODME” stand for?

Oil Detection Master Equaliser.

Oil Depletion Miscibility Equipment.

Oil Discharge Monitoring Equipment.

Overboard Detection and Measuring Equipment.

Code: TEDC What indicates “MIDSHIP”, in the figure?

Midships is indicated by B, in the figure.

Midships is indicated by A, in the figure.

Midships is indicated by C, in the figure.

Midships is indicated by D, in the figure.

Code: JLRA What equipment is provided in a liferaft to help you keep warm in cold weather?

The floor of the raft has a second layer which can be inflated to help insulation, in addition to the thermal protective aids (10 % of complement, minimum 2).

Thermal protective aids for each person.

At least 10 % of the rafts complement with a minimum of 2 thermal protective aids are provided.

Code: FBBB Whilst in the engine room you hear the CO₂ release alarm, what action if any should you take?

Proceed to the engine control room and call the bridge for further instructions.

Take no actions as it is probably someone testing the system, as the fire alarm has not been sounded and the engine room is not on fire.

As CO₂ can not kill you, secure present work and proceed out of engine room.

Leave the engine room as quickly as possible, closing all doors behind you.

Code: DKQF Anyone of the crew who is assigned to watch duties in port has a number of important tasks to carry out. Which one of the listed tasks should be included in the watchman’s duties?

Check the moorings for correct tightness and ensure the gangway remains safe and secure.

Check the safe and secure handling of cargo.

Check the number of persons joining and leaving the vessel.

Check there is always a shore watchman on the jetty.

Code: CLNB Oily rags and metal turnings:

Are a fire hazard because they are liable to spontaneous combustion.

Are not a fire hazard unless ignited.

Are not a fire hazard at all.

Are a fire hazard because they generate their own oxygen when ignited and are therefore difficult to extinguish.

Code: BSFK What is a polar (liquid)?

A liquid that conducts electricity.

A liquid that emits flammable vapour.

A liquid that doesn’t mix with water.

A liquid that mixes with water.

Code: FUSE You are leading a team fighting an interior fire. If you see the colour of the smoke changing from dark black to grey, what is the most probable reason for that change?

The team is applying water and the temperature is decreasing.

The temperature inside is increasing.

The percentage of oxygen is getting below 15 %.

The team has started to ventilate.

Code: CQDW What signal, if any, is specified in SOLAS as the “Abandon ship” signal?

The “Abandon ship” signal is not specified, only the general emergency alarm signal is stated.

Four long blasts.

Six short blasts, followed by one long blast.

Seven short blasts followed by one long blast.

Code: AOJD What is the ideal working temperature for physical work?

10-15 °C.

21-35 °C.

17-20 °C.

5-10 °C.

Code: ONFS Why should there be checklists or work permits for hazardous operations?

To make sure the job is done under controlled conditions.

So we know who to blame when something goes wrong.

To locate crew members in case of emergency.

Because it is required by USCG (US Coast Guard).

Code: WEFB What are the duties of the “Standby Watch keeper” when he is not on the bridge?

Remain in the expected location, available for immediate call from the bridge.

Tidy up the accommodation and clear the mess rooms.

Return to his cabin and catch up with some sleep.

Patrol the ship and report anything unusual to the bridge.

Code: EVBH What might safely be used to prevent a load swinging when lifted by a crane?

Guide or tag lines, tended from a safe location.

A cargo net.

Personnel underneath the load, holding onto it and restricted its movement.

Short, jerky movements on the ship’s controls.

Code: AGOS What is understood by the term “take the helm”?

Change the place where the lookout is standing.

Take over heaving of a rope.

Take over the steering of the ship.

Take a message to another officer.

Code: KFDP What do you understand by: “Let go the port anchor”?

Open the port windlass brake.

Put the port windlass brake in gear.

Slacken the port anchor cable.

Put the port windlass brake in gear and lower the anchor.

Code: BXPW To control bleeding, a tourniquet should be applied:

Only when all other means have failed.

Whenever it is possible to stop bleeding.

Only on Radio medical advice.

Whenever you have to transport the casualty.

Code: XQPB Which of the following disposal would be permitted?

Food waste from a vessel outside a special area and 12 miles from the nearest land.

Paper products from a vessel inside a special area and 15 miles from the nearest land.

Food waste from a vessel outside a special area and 10 miles from nearest land.

Food waste from a vessel inside a special area and 10 miles from nearest land.

Code: GMAN Commonly used on an oil tanker, what does an “Explosimeter” measure?

The composition of hydrocarbon gas/air mixtures in a tank atmosphere.

The amount of H₂S gas in a tank atmosphere.

The level of oxygen present within a tank.

The relative amounts of nitrogen and combustible gases within a tank.

Code: ECLL What is the meaning of “SWL”?

Single working load.

Salt water load.

Safe working load.

Single Winch Load.

Code: DCLC What is the correct understanding of the term “gangway”?

Portable bridge arrangement between ship and shore, when alongside.

The ladder arrangement to allow walking access down the ship’s side into a boat alongside the vessel.

The access arrangements on an oil tanker between the bow and the after accommodation.

The access arrangements between the decks on the ship.

Code: AWWH What are the duties of an effective bridge lookout?

All of the alternatives specified.

Keep a lookout for other ships; navigation lights and any other dangers which may have no lights.

Ensure there is always a bridge lookout on duty and only leave the lookout when given permission.

Keeping a constant observation around the ship.

Code: XPNH What is the absolutely main purpose with fighting a fire on board?

Rescuing of life.

To put out the fire.

Try to put out the fire.

To limit the fire.

Code: LYKN What is a “Bollard”?

A Bollard is a loop in a rope.

A Bollard is a rope made up of several strands.

A Bollard is a very heavy rope.

A Bollard is a thick steel post to which mooring lines are secured.

Code: MQIM The diagram shows the lead of a rope during mooring operations and the possible point where it may break. Where would be considered the safest place to be standing?

Outside the coloured zone.

Between the “point of break” and the “point of restraint”.

It is impossible to stand clear of any possible danger areas surrounding wires or ropes and therefore there are not any safe areas.

Inside the coloured zone and behind the “point of restraint”.

Code: SKFX Which of the following are frequent causes of fires in accommodation?

Covering of electric fires with blankets.

Smoking in bed.

Overloading electric plugs.

1. Smoking in bed; 2. Covering of electric fires with blankets; 3. Overloading electric plugs.

Code: HWQG The passage of electrical current through the body may result in severe and sometimes fatal injuries. You are witness to man getting electric current through his body and is stuck to the dangerous area. It is impossible to switch off the current by any main switch. How to break the current safely?

Call the electrician immediately.

Apply fish oil on your hands and cut the cords by the use of any metallic pliers.

Stand on dry insulating material and pull the person away with insulating material.

Just take the casualty in your arms and pull the person away.

Code: DEVQ What is the most common fixed fire fighting extinguishing system fitted in an engine room?

A pressure water-spraying system.

A carbon dioxide (CO₂) system.

An halogenated hydrocarbon system.

A chemical powder system.

Code: YJGQ What are the main components of the atmospherical air?

O₂: 21 %, N₂: 72 %, H₂O: 5 %, CO₂: 2 %, Rare gases: traces.

O₂: 75 %, N₂: 10 %, H₂O: 5 %, CO₂: 5 %, Rare gases: traces.

O₂: 21 %, N₂: 78 %, H₂O: traces, CO₂: traces, Rare gases: traces.

Code: LKVE Give the meaning of the following symbol:

Area protected by Halon 1301.

Area protected by drenching system.

Area protected by sprinkler.

Sprinkler installation.

Code: YXCS A person wearing an adult lifejacket shall be able:

To dive half a meter under the water surface.

To jump from any height into the water without being injured or damaging the lifejacket.

To swim half a mile distance and board a survival craft.

To swim a short distance through the water and board a survival craft.

Code: PEIT Which of these weapons are widely available and commonly used by criminals and terrorists to further their aims?

Gun.

Liquid explosive.

Vehicle borne device.

Incendiary device.

Code: NJMP Which of these actions should crew take if a suspicious object that may be a bomb is located during a search?

Confirm with their search partner that the object found is suspicious.

Throw the object overboard.

Place the object in a desk drawer or file cabinet.

Cover the suspicious object with a box or blanket.

Code: ARIW To conform with “best practice”, can you drive a crane and stand-by for a colleague who has entered a cargo tank at the same time?

Yes.

No.

Code: PYPE All heat burns should be:

Treated by the doctor only.

Applied with soothing lotion as soon as possible.

Covered with Gauze or bandage immediately.

Cooled as quickly as possible with running cold water for at least 10 minutes.

Code: XATB During cargo or bunker operations, oil response equipment is to be:

Ready for immediate use.

In its store room.

Used elsewhere in the ship.

In the cargo pump room.

Code: ODOV After loading certain oil cargoes, known as “static accumulator” cargoes, it is common to wait for the cargo to stop moving within the tank and reach the point at which it will cease generating any further static electricity, before taking any samples or ullages. Which of the following is the typical length of time allowed for this process?

30 minutes.

2 minutes.

75 minutes.

120 minutes.

Code: PRDY What is the normal name given to the fuel oil used for the ship’s main engines?

Cargo.

Lubricating oil.

Fuel oil.

Bunkers.

Code: VDDD What is the normal name of the special wire/rope on board the ship used to make a tug fast?

Towing spring.

Tugs rope.

Mooring wire.

Tugs wire.

Code: JSWF According to industry standard guidelines and assuming terminal regulations do not require otherwise, what action should be taken to drain water that builds up on the deck during cargo handling operations in rainy conditions?

The accumulated water is to be drained periodically and the scupper plugs to be immediately closed once the water has been run off. Water containing oily residues is to be transferred to a slop tank or other suitable receptacle.

The accumulated water is to be transferred to a spare tank.

During periods of heavy rain, it is considered prudent and safe to allow water to drain continuously; therefore scupper plugs should be removed in such conditions.

Code: BRXF To maintain a fire, three conditions need to be met: oxygen, combustible material and sufficient temperature for combustion. What subject must be removed to extinguish the fire?

Oxygen.

Either of the mentioned alternatives.

Combustible material.

Heat, oxygen and combustible material.

Code: AQBO What will you bring in a lifeboat if the ship is abandoned?

Warm clothes, blankets and lifevests.

As much biscuit and canned food as possible.

All pets that will most likely not be able to enter the boat themselves.

All valuables, like money, jewelry etc.

Code: AISX In a smoke filled alleyway where will the cleanest air be found, and how should you proceed out?

Sit and wait for the rescue party.

It will be the same in all parts, therefore I would just leave as quickly as possible.

Near to the deck, crawl out keeping your face as near to the deck as possible.

Towards the upper part, stand as tall as possible and walk out.

Code: AECJ A drip tray containing oil is on fire. The only fire fighting equipment available is water hose with spray jet/spray nozzle. How, if at all, should you attempt to put out this fire using water?

The water can be applied in a fine spray starting from the front in a sweeping motion.

Water should be applied in a jet to the back of the fire.

Water should be applied to the oil in a single jet only.

Water should not be used on any type of oil fire.

Code: OAQC What is the term used to designate the work that may cause heat, sparks or flames and that cannot be performed if specific compulsory precautions are not taken in places where nearby flammable products could be present?

Hot work.

Flammable work.

Machinery labour.

Specially hazardous work.

Code: NIDT When a fire breaks out in the accommodation, cargo holds or on deck, who is in charge of the fire fighting operations?

The person who is designated in the muster list.

The first officer arriving at the scene.

The first person arriving at the scene.

The chief officer.

Code: NSRP A davit-launched liferaft on board a ship is so arranged to be boarded by its full complement of persons in less than:

3 min.

4 min.

1 min.

2 min.

Code: QOUP Who is the responsible person for the safety of the ship and all those onboard?

The Master.

Master, Chief Officer and Chief Engineer.

The company.

The authorities in each different port the ship calls.

Code: IHKR Which of these are indicators that an individual may be a drug smuggler?

The individual wears bulky or out of season clothing.

The individual is disinterested in the ship’s cargo.

The individual spends his or her free time hanging out with others.

The individual makes small local purchases.

Code: APBL You have been assigned to enter a hold and check the general cargo stowed in it, as part of an on-passage monitoring procedure. What must be in place before you can do that?

The necessary permits, based on valid atmospheric and other applicable tests.

Written instructions from the Chief Officer on what to check in the hold.

A list of the items stowed in the applicable hold, extracted from the Cargo Manifest, must be available for reference during the check.

Emergency equipment at the after end of the maindeck.

Code: HOMW If a patient is bleeding from nose:

Pinch soft part of the nose for 10 minutes while keeping the head forward over a basin.

Put a piece of swab or gauze in the nose.

Let the blood stop by itself.

Ask the patient to lie flat on the floor.

Code: BEOP When you join a new ship, how are you informed about safety rules, alarm instructions and your own duties in case of an emergency?

By muster lists exhibited in conspicuous places.

By folder distributed to each crewmember.

By alarm instructions in all crew cabins.

By oral instructions by the Captain.

Code: RPIG What is name of the machine shown, used to heave on the ropes during mooring and unmooring?

Winch.

Crane.

Windlass.

Capstan.

Code: UCWT What are the two basic types of oil tanker?

Crude Oil carrier and Product carrier.

Fuel Oil carrier and Lube Oil carrier.

Crude Oil carrier and Black Oil carrier.

Black Oil carrier and Fuel Oil carrier.

Code: IDIL In the figure, which letter indicates what is known as “mooring bits”?

The mooring bits are indicated by D, in the figure.

The mooring bits are indicated by A, in the figure.

The mooring bits are indicated by B, in the figure.

The mooring bits are indicated by C, in the figure.

Code: IDRK What is the output shown on the “Rate of Turn” display fitted on the bridge?

The Rate of Turn indicator displays the rate the ship is swinging in degrees per minute.

The Rate of Turn indicator shows the changing angle of the vessel from the meridian.

The Rate of Turn display shows the turning speed the vessel is swinging in degrees per second.

The Rate of Turn indicator shows the rudder angle applied by the helmsman to turn the ship.

Code: GKQH When acting as wheeelman what should be the method of responding to an order?

When receiving an order, the order should be repeated back to the person who gave it.

The order needs to be acted upon and this will indicate you understood what was said.

When acting as wheelman and given a helm order you should always say “Yes, sir”.

The response to an order should be to acknowledge that order and then carry out what you were told to do.

Code: DQKN In which one of the following an oil, the flash point of which only needs to be over 43 °C, may be used?

In emergency generators.

In inert gas generators.

In the main engine.

In the kitchen.

Code: ECAT What is the factor that makes the difference between a deflagrating and a detonating explosion?

The speed of the shock wave created by the initial combustion.

The initial pressure, temperature and moisture content.

The material which is at the origin of the explosion (powder or gas).

The confinement of the place where the explosion occurs (inside or outside).

Code: NCMM Which of the following hose lengths corresponds best to the most common ones found onboard?

20 m.

10 m.

5 m.

30 m.

Code: BBVQ Give the meaning of the following symbol:

A class fire door self closing.

B class fire door self closing.

Closing appliance for exterior.

Foam valve.

Code: GMQY Give the meaning of this symbol:

Lifebuoy with line.

Lifebuoy.

Lifebuoy with light.

Lifebuoy with light and smoke.

Code: IDEA An evacuation-slide must be capable:

Of being deployed by one person.

Of being deployed by two persons.

Of being deployed by two person or remotely controlled from the bridge.

Of being deployed by one person or remotely controlled from the bridge.

Code: CNQH The container for an inflatable liferafts shall be made:

Watertight, as far as possible, except for drain holes in the container bottom.

Non-watertight.

Completely watertight.

Non-watertight if fitted with drain holes in the container bottom.

Code: BKTW In safety terms, what is an “interlock”?

A device which prevents an operation of equipment to take place, to allow access or maintenance to be carried out.

An alarm fitted to the freezers when someone is inside.

An electrical switch which is locked when not in use.

A device for string containers on deck.

Code: ASQX When going aloft in a bosun’s chair what kind of shackle should be used to attach the chair to the mast stay and how should it be used?

An approved shackle attached with bow of shackle running on the stay.

Any shackle is adequate for this task but it must be attached at the discretion of the seaman going aloft.

A shackle selected by the seaman and used as he wants.

An approved shackle with the pin of the shackle against the stay.

Code: FTEC Identify this symbol:

Emergency generator.

Inert gas installation.

Escape gate.

Fire glass door.

Code: LNDB What do the letters IMDG stand for?

International Maritime Dangerous Goods.

International Marine Dangers Group.

International Monitoring Department (Geopolitics).

Interactive Maritime Dangerous Goods.

Code: SGTW What should you know about the emergency stops on deck?

Where they are located and how to operate them.

How to disconnect or over-ride them for routine work.

I do not need to know anything about the emergency stops. It’s only the officers who operate them.

Where the re-sets are and how to re-set them.

Code: PNOP What do you understand by the order: “Move the pilot ladder to the other side”?

To shift the pilot ladder to the opposite side of the ship.

To change the position of the pilot ladder from the main deck to the fore deck.

To rig another pilot ladder.

To move the pilot ladder further along nearer to the bow.

Code: OSOO Which of these emission control requirements is correct?

Low sulphur fuels reduce emissions of volatile organic compounds.

Installation of an exhaust gas cleaning system reduces emission of nitrogen oxide.

Equipment containing ozone-depleting substances may be dumped at sea 50 miles from land.

Incineration of PCB’s is permitted.

Code: OEWT On the diagram, which arrowed line is indicating the “Breadth” of the vessel?

The breadth is indicated by letter B, in the figure.

The breadth is indicated by letter C, in the figure.

The breadth is indicated by letter A, in the figure.

The breadth is indicated by letter D, in the figure.

Code: LARA On the figure 4 possible definitions of the term “BREADTH” are given. Which one is the correct one?

Breadth is given by B on the figure.

Breadth is given by C on the figure.

Breadth is given by A on the figure.

Breadth is given by D on the figure.

Underkeel clearance is given by A on the figure.

Underkeel clearance is given by B on the figure.

Underkeel clearance is given by C on the figure.

Underkeel clearance is given by D on the figure.

Code: AXYU On the figure 4 possible definitions of the term “AIR DRAUGHT” are given. Which one is the correct one?

Air draught is given by C on the figure.

Air draught is given by B on the figure.

Air draught is given by A on the figure.

Air draught is given by D on the figure.

Code: VTLR The engine room is equipped with regular fire hoses and nozzles. What is important to observe when using water as an extinguishing agent in the engine room?

All the mentioned alternatives.

Water has a clear limitation in fighting an oil fire.

Water may short circuit electrical installation and may be a threat to the personnel operating the fire hose as well as to electrical equipment itself.

Code: AUYI What is the name of the device used for continually checking ballast water as it is pumped overboard?

Oil Detection Monitoring Equipment (ODME).

Ballast Monitor (BM).

Ballast Supervising Monitor (BSM).

Ballast Handling Monitor (BHM).

Code: HQLU In the diagram, which letter is indicating the “bits” which would probably be used by the “FORWARD SPRING” when mooring the ship?

The bits for the Forward Spring is indicated by D, in the figure.

The bits for the Forward Spring is indicated by B, in the figure.

The bits for the Forward Spring is indicated by C, in the figure.

The bits for the Forward Spring is indicated by A, in the figure.

Code: IHXA What letter indicates the direction “AHEAD”, in the figure?

Ahead is indicated by A, in the figure.

Ahead is indicated by B, in the figure.

Ahead is indicated by C, in the figure.

Ahead is indicated by D, in the figure.

Code: CEJU What is the role of a tug in a port?

A tug assists the ships to moor and unmoor.

A tug is the normal vessel used by the pilot to board a ship.

A tug provides transport for the port personnel.

A tug is used to assist the fishing boats when they enter the port.

Code: QXAK Which activity will have the greatest fire-fighting effect in case of a fire?

Extinguishing attempt is started immediately.

All fire-fighting teams are organized as soon as possible.

All possible fire-fighting equipment is brought to the scene.

Call the Chief Officer.

Code: EEHC An alarm signal consisting of seven short blast followed by one prolonged blast is sounded by the ship’s whistle and alarm bells. What are you to do?

Go to your lifeboat station (muster station).

Report on the bridge (deck crew) or engine control room (engine crew) for further orders.

Go to your fire station.

Go to (or remain in) your cabin and wait for further orders.

Code: NNOO What is the meaning of this symbol?

Lifebuoy with light and smoke.

Lifebuoy with line.

Lifebuoy with light.

Lifejacket.

Code: GMOE Among the additives used to improve the effectiveness of water in the fight against fire there are the moisturing ones. What is the task they perform?

They reduce the surface tension of water.

They protect the fuel with a thin covering that holds up the ignition.

They increase the viscosity of water.

They protect the fuel with a thin covering that holds up the ignition and they increase the viscosity of water.

Code: VHKD Dry chemical powders extinguish fire by:

Inhibition, smothering and/or opacification.

Cooling and/or inhibition.

Unfeeding, cooling and/or smothering.

Cooling and/or smothering.

Code: VMJP Give the meaning of the following symbol:

Sprinkler horn.

CO₂ horn.

Water monitor gun.

Halon horn.

Code: YHJP An immersion suit is constructed such that it can be unpacked and donned within:

2 min.

3 min.

5 min.

4 min.

Code: TIFE A lifejacket has sufficient buoyancy and stability to lift the mouth of an unconscious person at a minimum of:

120 mm above the water (in calm water).

40 mm above the water (in calm water).

160 mm above the water (in calm water).

180 mm above the water (in calm water).

Code: GSES The rescue quoit of a liferaft is attached to a buoyant line whose length is at least:

30 m.

10 m.

50 m.

5 m.

Code: KIQX You have abandoned ship in a liferaft. In most cases, which of the following actions should you generally take?

Organise a lookout system. Join up with other survival craft if possible. Stream the sea anchor.

Join up with any other survival craft and stream the sea anchor.

Start paddling in the direction of the nearest land.

Organise a lookout system.

Code: IWWB, JALP What is the ideal humidity in a working environment?

40-60 %.

10-30 %.

103-119 %.

70-85 %.

Code: FEUF What are the people probably doing in the picture?

The people are hosing down the cargo hold to clean it.

The people are fighting a fire.

The people are playing with water.

The people are pressure testing the hull plating.

Code: WDEJ Which of the following is false when a casualty is bleeding?

Cover the wound with a cloth.

Control bleeding.

Treat for the shock.

Encourage patient to lie quite and re-assure.

Code: CGPV Which of the following is part of the spill response equipment inventory?

Sorbents.

Hand cleaner.

The pressure washer.

Chipping goggles.

Code: HveRxu17 Where on the illustration of a mooring deck is the “PANAMA LEAD”?

The Panama Lead is indicated by letter C.

The Panama Lead is indicated by letter B.

The Panama Lead is indicated by letter A.

The Panama Lead is indicated by letter D.

Code: JmNxeEYx Would there ever be the need for two lookouts on the Bridge watch?

Yes, possibly when there is dense fog and heavy traffic.

Every night there should be two lookouts, one on each bridge wing.

No, one lookout is sufficient even in fog.

Never necesssary.

Code: 8xmSSmdT What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?

The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Wide step”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”.

Code: 9JCmoNRG What is a mooring line used for?

A mooring line is a thick wire or synthetic rope used to moor the ship.

A mooring line is a line thrown ashore when a vessel ties up.

A mooring line is a line that is passed through a block ashore.

A mooring line is a small diameter line attached to a large diameter rope.

Code: znV63IEK What are the duties of the bridge lookout during the night, when the vessel is in the middle of the ocean?

The lookout must keep a lookout all-round the ship and report anything sighted, or heard, to the Officer of the Watch.

The lookout must keep a lookout ahead of the vessel and report anything sighted to the Officer of the Watch.

The lookout should remain on the bridge wing to be at hand to deliver messages as required by the Officer of the Watch.

The lookout must standby ready to take the wheel when required by the Officer of the Watch.

Code: rSQmGttA What is the objective of the merchant navy?

To safely transport goods by sea.

To provide employment for persons who wish to become seafarers.

To transport and deliver goods as quickly as possible.

To earn money for the shipowner.

Code: 0RWo#KAP Which is the “STARBOARD QUARTER”, in the figure?

The Starboard quarter is C, in the figure.

The Starboard quarter is A, in the figure.

The Starboard quarter is B, in the figure.

The Starboard quarter is D, in the figure.

Code: D829ih11 Read the text and answer the following question: “It is recommended that every prospective seafarer should, before being employed in a sea-going ship, receive proper training in personal survival techniques. In respect of such training several recommendations are made.” When should training in personal survival techniques be given?

Before being employed.

During the first week on board.

After joining the ship.

After one period at sea.

Code: kgTNo3vk In the figure, which letter indicates the “BREADTH” of the vessel?

Breadth is indicated by B, in the figure.

Breadth is indicated by D, in the figure.

Breadth is indicated by A, in the figure.

Breadth is indicated by C, in the figure.

Code: gL0YGUZp What is meant by the term “bunkers”?

It means fuel oil used in the ship’s engine(s).

It refers to the storing of lubricating oil.

It is a measure of the quantity of oil cargo loaded.

It means the number of available bunk spaces available on the vessel.

Code: gRCTu6Ai What is understood by the word “Bollard”, when mooring a ship?

A Bollard is a thick steel post to which mooring lines are secured.

A Bollard is a very heavy rope.

A Bollard is a loop in a rope.

A Bollard is a rope made up of several strands.

Code: ppyRULP6 What do you understand by the term “Let Go” when applied to mooring and unmooring?

Let Go means to cast off the mooring ropes and wires.

Let Go means to let seafarers go ashore.

Let Go means to slacken a mooring rope.

Let Go means to leave the ship.

Code: qpMHzDpF How would you alert others onboard if you saw a person falling overboard?

If I saw a person falling overboard I would shout repeatedly, “Man overboard”.

If I saw a person falling overboard I would run to the Bridge.

If I saw a person falling overboard I would shout once, “Man overboard”.

If I saw a person falling overboard I would inform the Bosun.

Code: xCnHekEn What is the daytime signal to be shown when the vessel is at anchor?

A black ball forward where it can best be seen.

The national flag flying from the fore mast.

A black diamond forward where it can best be seen.

Two black balls where they can best be seen.

Code: MoormehH What do you understand by the order: “Move the pilot ladder to the other side”?

Move the pilot ladder to the other side, means: to shift the pilot ladder to the opposite side of the ship.

Move the pilot ladder to the other side, means: to move the pilot ladder further along nearer to the bow.

Move the pilot ladder to the other side, means: to rig another pilot ladder.

Move the pilot ladder to the other side, means: to change the position of the pilot ladder from the main deck to the fore deck.

Code: z6$J5Blz Why could dirty and oily areas of the deck be dangerous?

They may cause people to slip over and hurt themselves.

They are areas which should be cleaned up.

They show the ship is not efficient.

They do not look good to the customers.

Code: xVDCIN4K What is understood by the term “Take the helm”?

Take over the steering of the ship.

Change the place where the lookout is standing.

Take over heaving of a rope.

Take a message to another officer.

Code: brPVTqsp When should the lookout report another vessel?

As soon as it is sighted or heard.

When the navigation lights can be clearly seen.

When the other vessel is approaching the ship.

When the other vessel is forward of the beam of own ship.

Code: Y7q32D2b In the figure, which letter indicates which item is the “WINDLASS”?

The Windlass is indicated by B, in the figure.

The Windlass is indicated by A, in the figure.

The Windlass is indicated by D, in the figure.

The Windlass is indicated by C, in the figure.

Code: 5S#43cvy What do you understand by: “Secure the tug”?

To make fast the tug.

To let go the tug.

To pass a line to the tug.

To pick up the tug line.

Code: jpuBDEWA In the diagram, which letter is pointing to the area of the ship known as the “STERN”?

The Stern area is indicated by C, in the figure.

The Stern area is indicated by A, in the figure.

The Stern area is indicated by B, in the figure.

The Stern area is indicated by D, in the figure.

Code: kSAej8ij In which direction would the “FORWARD HEAD LINE” normally run?

The forward head line would normally lead forward from the bow.

The forward head line is normally the line used by the forward tug.

The forward head line would normally lead straight across to the jetty and be as short as possible.

The forward head line would normally lead from the bow back towards the stern.

Code: q3TGBl3b What letter indicates the direction “AHEAD”, in the figure?

Ahead is indicated by A, in the figure.

Ahead is indicated by B, in the figure.

Ahead is indicated by C, in the figure.

Ahead is indicated by D, in the figure.

Code: Kg4dm5se In the diagram, the amount of water under the keel is indicated by the letter “C”. Which bridge instrument would measure this value?

Echo Sounder.

Draught Indicator.

ECDIS.

ARPA Radar.

Code: h2CRbD6c What is the output shown on the “Rate of Turn” indicator fitted on the bridge?

The Rate of Turn indicator displays the rate the ship is swinging in degrees per minute.

The Rate of Turn indicator shows the rudder angle applied by the helmsman to turn the ship.

The Rate of Turn indicator shows the changing angle of the vessel from the meridian.

The Rate of Turn indicator shows the turning speed the vessel is swinging in degrees per second.

Code: FkOTEpet During an anchoring operation, what does the bridge team mean when they ask “How is the chain leading”?

The bridge would like to know the direction of the anchor cable from the hawse pipe.

The Master is requesting the Chief Officer to inform the bridge of whether he can determine which way the ship is moving in the water.

The Master is asking the Chief Officer whether the ship needs to be moved forward and take weigh off the anchor cable.

The Master is asking the Chief Officer whether the vessel is dragging anchor.

Code: WfaUz9Ua What do you understand by: “Let go the port anchor”?

Open the port windlass brake.

Slacken the port anchor cable.

Put the port windlass brake in gear and lower the anchor.

Put the port windlass brake in gear.

Code: 25iK5JXv In the diagram, which letter is indicating the position “MIDSHIPS”?

Midships is indicated by B, in the figure.

Midships is indicated by A, in the figure.

Midships is indicated by C, in the figure.

Midships is indicated by D, in the figure.

Which of the following ear protection devices is most effective?

Ear muffs.

Ear plugs.

Dry cotton or cottons balls.

All equal.

Which one of the listed requirements regarding the stowage of liferafts corresponds to present SOLAS regulations?

Liferafts shall be stowed with its painter permanently attached to the ship.

Davit-launched liferafts shall be stowed on starboard side of the ship.

Liferafts intended for throw-overboard launching shall be stowed midships secured tom eans for transfer to either side.

If you detect a fire on board the ship, dependent on the situation, which of the following actions is the first to be taken?

Raise the fire alarm.

Try to kill the fire immediately by use of fire-extinguishers or other adequate appliances.

Call the officer on duty.

The minimum number of lifebuoys required on a cargo ship depends on:

The length of the ship.

The number of persons on board.

The tonnage of the ship.

What kind of permits have to be obtained before starting cold work in tanks?

Cold work permit + Permit for entry.

Hot + Cold work permit.

Hot work permit.

Cold work permit.

If the order is given to a mooring deck to “make fast”, what would happen?

Mooring ropes are transferred from a winch drum to the bitts.

Make fast means to act very quickly.

Make fast means to apply a lashing to a coiled mooring rope.

The wearer of a lifejacket can jump into the water without injury and without damaging the jacket from a height of at least:

4,50 m.

7 m.

12 m.

10 m.

In order to extinguish a flammable liquid of the same kind as alcohol, we can use:

Anti-alcohol foam.

Sprayed water.

Water.

Water and foam.

The effectiveness of foam is based on:

Smothering and cooling.

Dilution.

Inhibition.

Smothering and dispersion.

Is it safe to carry a bag of tools in your hand, up a vertical ladder? Select the best option:

No it is not – two hands should always be used to climb the ladder.

Yes it is – provided three points of contact are maintained.

Yes it is – provided the ship is not rolling too badly.

During bunker transfer operations, deck scuppers should be:

Plugged to prevent spilled oil flowing overboard.

Only fitted to the side of the vessel that bunkers are being loaded.

Attended by crew to collect any spilled oil that approaches.

When you join a new ship, how are you informed about safety rules, alarm instructions and your own duties in case of an emergency?

By muster lists exhibited in conspicuous places.

By oral instructions by the Captain.

By folder distributed to each crewmember.

A lifejacket is so constructed that a person can correctly don it within a period of:

1 min.

2 min.

30 sec.

In which direction would the “FORWARD HEAD LINE” normally run?

The forward head line would normally lead forward from the bow.

The forward head line is normally the line used by the forward tug.

The forward head line would normally lead straight across to the jetty and be as short as possible.

Having boarded the liferaft, how do you release the painter?

Cut it with the safety knife stowed on the exterior of the canopy close to the painter attachment point.

Let go the quick release toggle.

Wait for it to break as it is provided with a weak line.

Which of these emission control requirements is correct?

Low sulphur fuels reduce emissions of volatile organic compounds.

Incineration of PCB’s is permitted.

Equipment containing ozone-depleting substances may be dumped at sea 50 miles from land.

The container for an inflatable liferafts shall be made:

Watertight, as far as possible, except for drain holes in the container bottom.

Completely watertight.

Non-watertight if fitted with drain holes in the container bottom.

Non-watertight.

Give the meaning of the following symbol:

Gas detector.

CO₂ horn.

CO₂ portable fire extinguisher.

Area protected by CO₂.

The lifting equipment on the vessel must be operated by:

Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the.

Stevedores, manufacturer’s maintenance engineers and senior ratings only.

Deck officers and ratings, engineering officers and ratings, GP crew if applicable, who are in possession of crane operation training certificates issued by the company.

All deck officers and ratings and selected engineroom personnel.

Prior to entering a cargo hold to check the cargo condition stowed in it, you must ensure that:

The necessary permits, based on valid atmospheric and other applicable tests, are issued and valid for entry.

Written instructions from the Chief Officer on what to check in the holdare signed by all persons entering the space.

A list of the items stowed in the applicable hold, extracted from the Cargo manifest, must be available for reference during the checks.

Emergency equipment at the after end of the main deck is in place.

What is the first thing you are doing when having a lifeboat drill?

Put on the life jacket.

Swing out the davit.

Enter the lifeboat.

Wait for order.

What should be done by the helmsman, if the OOW (officer on watch) gives them the order: “Starboard ten”?

Repeat the command back and then using manual control set the rudder to 10 degrees to starboard.

Repeat the command back and then put the control over sufficiently for the ship to swing at a rate of 10 degrees per minute to starboard.

Enter the lifeboat.

Wait for order.

Which of the following is false when a casualty is bleeding?

Cover the wound with a cloth.

Treat for the shock.

Control bleeding.

Encourage patient to lie quite and re-assure.

Give the meaning of the following symbol:

Secondary means of escape.

Primary means of escape.

A class division.

Main vertical.

An inert gas system is used during a Crude Oil Washing operation:

To ensure a safe atmosphere in the cargo tank throughout the operation.

To build up internal pressure and so increase the pumping rate.

To protect the condition of the steel structure of the tank.

To ensure that the build-up of sediments is kept at a minimum.

The most commonly recognised hazard associated with unprotected entry into an enclosed space on board an oil tanker is:

The atmosphere in the space may contain toxic gases or be deficient in oxygen.

The lack of communication with the OOW due to which the work may take longer to complete.

The space may not be well lit up, and hence resulting in inadequate movement of the person entering.

The presence of oil in the space which may result in slips/falls and crew injuries.

What kind of foot wear should be used when working on deck and in the engine room?

Safety shoes or safety boots.

Rubber boots.

Tennis shoes.

What makes an effective look-out in a high risk piracy area?

Keeping a constant observation all around the vessel.

Having two lookouts working together at all times.

Having the lookout armed and dressed in protective clothing.

Keeping the lookout inside the vessel bridge.

An immersion suit is:

Not allowing undue ingress of water after a jump from a height of not less than 4,5 m into the water.

Not allowing undue ingress of water after a jump from a height of not less than 18 m into the water.

Totally waterproof whatever may be the condition of immersion.

What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?

The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”.

The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”.

What do you understand by the term: “Let go the tug”?

Let go the tug means: to cast off the lines that secure the tug to the ship.

Let go the tug means: to tell the tug master to steer away from the ship.

Let go the tug means: to cut the lines securing the tug to the ship.

If cicrumstances permit, how should low expansion foam be applied to oil burning near a bulkhead of the engine room?

The foam should be aimed at the bulkhead behind the fire and allowed to spread out slowly over the fire.

The foam should be aimed at about 45 degrees upwards so that it can drop onto the fire.

The foam should be applied to the centre of the fire.

What shall a rescue person use if he has to jump into the water in order to assist a survivor?

Survival suit and lifeline.

Lifeline.

Survival suit.

Lifejacket.

What does the term “Hard a Starboard” or “Hard to Starboard” mean?

Put the wheel fully over to starboard.

Do not allow the vessel to swing to port.

Start the ship swinging to starboard.

The wheel is difficult to turn to starboard.

What is the purpose of explosimeters?

Measure the amount of explosive gases in % of LEL.

Measure electric charging in the atmosphere.

Check how much time you have before an explosion.

A lifebuoy is constructed to withstand a drop into the water from a height of:

30 m.

18 m.

10 m.

Before using a bosun’s chair you should:

Personally check it to make sure it is safe to use.

Wet the rope to tighten up the splice.

Ask the bosun to check it.

Tie it on the gantline with a bowline.

How much can the concentration of oxygen in the air decrese before it is dangerous to stay in the atmosphere without breathing apparatus?

2-3 %.

5-10 %.

10-15 %.

21 %.

Which of the following features is required for an anti-exposure suit?

Is fitted with a light and a whistle.

Is marked with the name of the vessel to which the appliance belongs.

Is made of such a material that it cannot be torn.

Can be continuously worn without impeding every duties to be performed by the wearer when in normal watch on the bridge.

When must personal protective equipment be worn?

At all times when identified as a control method with risk assessment.

When making the vessel fast.

Only on deck.

Only in the engine room.

What is meant by the term “bunkers”?

It means fuel oil used in the main engine(s).

It refers to the storing of lubricating oil.

It is a measure of the quantity of oil cargo loaded.

It means the number of available bunk spaces available on the vessel.

Give the meaning of the following symbol:

Fire main with fire valves.

Foam valve.

Fuel lubricating oil valves.

Section valves drenching system.

What is a “cargo plan”, when applied to a ship?

The plan indicating where cargo is to be loaded and in what quantities.

The plan showing the cargo spaces and their capacity.

A discussion between the shore and ship to plan the procedure for loading cargo.

The plan to show the staff requirements at each hatch while the ship is loading cargo.

The term “IMDG” stands for:

International Maritime Dangerous Goods.

Interactive Maritime Dangerous Goods.

International Marine Dangers Group.

International Monitoring Department (Geopolitics).

How many buoyant smoke signals are carried in each liferaft with SOLAS A pack?

Nil.

When moving into an Emission Control Area for Sulphur, which of these is most important?

That low Sulphur fuel is actually being burned before entry into the ECA.

That the change-over to low Sulphur fuel is complete before arrival in port.

That the change-over to low Sulphur fuel was started before entry into the ECA.

A person wearing an adult lifejacket shall be able:

To swim a short distance through the water and board a survival craft.

To jump from any height into the water without being injured or damaging the lifejacket.

To swim half a mile distance and board a survival craft.

Which of the following actions will most effectively prevent fire in a cabin?

Ensuring that all persons avoid smoking in bed.

Request people to refrain from smoking.

Install fire detecting devices.

Removing all ashtrays.

During bunker operations, oil response equipment is to be:

Ready for immediate use.

In the cargo pump room.

In its store room.

Used elsewhere in the ship.

A person wearing a thermal protective aid shall be able:

To wear a lifejacket inside.

To jump into the water from a height of 4,5 m.

To climb up and down a vertical ladder.

To swim a short distance through the water and board a survival craft.

A lifejacket has sufficient buoyancy and stability to lift the mouth of an unconscious person at a minimum of:

120 mm above the water (in calm water).

180 mm above the water (in calm water).

160 mm above the water (in calm water).

40 mm above the water (in calm water).

How many thermal protective aids are carried in each liferaft?

10 % of the number of persons the liferaft is designed to carry, or two, whichever is more.

Nil.

Code: XHJI In the diagram, which arrow is pointing at the position known as the “Bridge”?

The Bridge is indicated by B, in the figure.

The Bridge is indicated by C, in the figure.

The Bridge is indicated by A, in the figure.

The Bridge is indicated by D, in the figure.

Code: eL0j0KeG Where is “AFT” in the figure?

Aft is B.

Aft is C.

Aft is A.

Aft is D.

Code: ??? On the figure there are four (4) possible definitions of the term “BOLLARD” given. Which one is correct one?

Bollard is B.

Bollard is D.

Bollard is C.

Bollard is A.

Code: ??? The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed below the vessel shaded. On this figure there are four (4) possible definitions of the term “UNDERKEEL CLEARANCE” given. Which one is the correct one?

Underkeel clearance is B.

Underkeel clearance is C.

Underkeel clearance is D.

Underkeel clearance is A.

Code: SMXY In the diagram, the depth of water under the keel is indicated by the letter “C”. Which bridge instrument would indicate this depth?

Echo Sounder.

GPS.

Draught Indicator.

ARPA Radar.

Code: HQXQ The diagram shows the direction that a rope runs during a mooring operation and a possible place where it may break. Where would be considered the safest position to stand?