Welcome to the website where you can pass online the CES CBT CD-4010 test on the subject «Maris ECDIS». Practice like this will help you as a marine specialist improve your knowledge with the help of online studying and appraisal practice. CES based on practical information and marine specialists experience.
CES tests developed for evaluating seaman basic knowledge by Seagull Company (rebranded as «OTG»), is an evaluating online-tool, used for revealing any professional preparation needed in specific fields of knowledge, defined by STCW.
CES tests have proven themselves as good tools for the selection and recruitment process, as well as advancing the level of knowledge of the current officers and crew. Ocean Technologies Group use various subjects for question creation, which includes:
Crowd and Crisis Management;
Integrated Navigation System (INS);
Ballast water management;
Handling and Stowage;
Vessel operation management and safety;
Marine engineering;
Maintenance and repair, etc.
Current test contains Seagull CES questions on the subject «Maris ECDIS». Those questions can be used for competence verification specialist capable of preventing accidental situations related with transporting safety, or also for self-examination.
«Maris ECDIS» subject includes theoretical and practical information about advanced training for work on any type of vessel. The “Maris ECDIS” test is designed to provide mariners with comprehensive knowledge and skills required for the effective use of Electronic Chart Display and Information Systems. Participants will learn how to navigate safely using ECDIS, ensuring compliance with international regulations and standards. The training covers a range of topics, including chart management, route planning and the interpretation of navigational data. Such sessions allow students to apply theoretical knowledge in simulated environments, enhancing their decision-making skills in real-world scenarios. Emphasis is placed on understanding the system’s limitations and troubleshooting common issues that may arise during navigation. Upon completion of the course, mariners will be better equipped to integrate ECDIS into their daily operations, thereby improving overall navigational safety and efficiency.
On this site Crew Evaluation System Test on the subject «Maris ECDIS» contains 52 question you need to answer with no possibility to go back to previous question. Therefore, we recommend carefully reading each question and making decision with no hurry. In case you have some difficulty answering, you have also possibility to request a hint.
Choose the regime, in which you want to pass CES test:
Training
Exam
Wild Mode
* Some questions may have more than 1 correct answer.
Another important task of the Application Manager is to?
Share protect the setup of ECDIS.
Password protect the setup of ECDIS.
User protect the setup of ECDIS.
Virus protect the setup of ECDIS.
Another way to switch between chart formats is to press?
F1.
F5.
F7.
F9.
Application Manager may be opened by double clicking the square icon located?
Somewhere on the screen.
On the option menu.
On the taskbar of ECDIS.
Windows taskbar on the bottom right of the screen.
By connecting the ships AIS transponder you may not only receive and plot AIS targets on the chart, but you may also, which statement is correct?
The AIS is able to send and receive dedicated messages via the ECDIS.
The ARPA is sending out AIS message.
The ECDIS sends/receives AIS messages.
The GPS connected to ECDIS allows sending messages.
ECDIS 900 – as a minimum each ECDIS is connected with?
Gyro, GPS and AIS.
Gyro, GPS and ARPA.
Gyro and GPS.
Gyro, GPS and Log.
ECDIS 900 – Following Information is Shared on all Workstations?
Time, Alarm Levels and Common Settings.
Heading, Speed and Time.
Position, Speed and Targets.
Time, Position and Depth.
ECDIS 900 – Logbook items to be stored in intervals. What alarms are stored in ECDIS logbook?
Status of main alarms as waypoint, XTE, grounding, CPA and position offset.
ETA, Position and CPA.
Position offset and grounding.
Status of main alarms as waypoints, CPA and grounding.
ECDIS 900 – Logbook items to be stored in intervals. What information regarding the chart in use is stored in ECDIS logbook?
Chart name and edition number.
Chart name, edition number, update number, date of update and data size of chart data.
Chart name, edition number, update number and date of update.
Update number and date of update.
ECDIS 900 – RADAR image can directly be shared on different Work Stations.
Only if it is Consilium Selux Radar.
Any RADAR.
Can not be shared.
Depends on Network.
ECDIS 900 – To share Charts, Routes and User Data across workstations – following function is used?
Copy and paste.
Network Share.
Transmit and Receive.
Copy Database.
ECDIS 900 – To share RADAR image from any RADAR other than Consilium. Following is required?
MARIS PC RADAR Kit.
Interface from the RADAR manufacturer.
Master’s Permission.
Network configuration.
ECDIS 900 – when receiving Navigation Data from other Sensors, the conversion to WGS Datum is?
Depends on HO.
Automatic.
Depends on type of Sensor.
Selected by User.
ECDIS 900 – when receiving Navigation Data from other Sensors, the conversion to WGS Datum is?
Depends on HO.
Depends on type of Sensor.
Selected by User.
Automatic.
Each ECDIS workstation is set up to share. (Only one of the alternatives can be correct)
Contents of the Charts, ECDIS user folder and ECDIS sub folders.
Contents of the Charts.
ECDIS sub folders.
ECDIS user folder.
How can you view a route by screen jump in Load/Unload?
Click on the import button.
Localize button.
The save as button.
The scroll button.
How to order Ocean Current for use in voyage optimization module?
From MDS application.
Directly in ECDIS 900 software.
It is sent automatically every day.
Send email to Chartservice.
How to set default value of turn radius and speed in ECDIS 900?
Right click on the route leg and enter default value for turn radius and speed.
Select settings, select time and enter default value for turn radius and speed.
Select settings button, select route tab and enter default value for turn radius and speed.
Select turn radius and speed button and enter value.
If non Consilium radar is to be connected and send data to ECDIS workstation, what will be needed?
PC Radar Kit.
PC ARPA Converter.
PC ARPA Kit.
PC Radar Converter.
Importing routes through voyage plan. How to verify conversion of an imported route?
Select and open the route in voyage plan.
Select display the converted route.
Select load/unload route, select converted folders and select route.
Select load/unload route, select converted folder and transfer the route to desktop.
Is it possible to change color of the safety zone in front of the vessel?
Yes.
Yes, but only when in route planning.
No.
Only in night display.
Logbook recordings. Where to go to check/adjust logbook recordings?
ECDIS logbook key in toolbar and select settings.
Chart handling key in toolbar and select settings.
Right click in console area and select settings.
Send an email request to MARIS Support.
Navtex software connected to ECDIS 900. What is required in a navtex message in order for the ECDIS 900 to automatically plot the position on the chart?
Must contain geographical coordinates.
Must be connected to AIS.
Must be connected to e-mail/internet.
Must contain name of station.
Objects on the ENC charts are stored in a database as identified objects and can be switched on and off. This allows?
Editing of charts.
Fixed charts on display.
Manipulation of the chart display.
None manipulation of the chart display.
Official vector charts produced by National Hydrographical Offices are called?
ENC.
ARCS.
AVCS.
C-Map.
On the Application Manager window, you will find two buttons on top. They are?
Reboot & Restore buttons.
Reboot & Shutdown buttons.
Reboot & Startup buttons.
Shutdown & Startup buttons.
Once the configuration is properly defined, check on the box «Freeze Configuration» to avoid?
Floating panel windows.
System damage.
Virus attack.
Unwanted changes.
One of the basic principles of ECDIS is to prevent access to the PC operational system by use of?
Application Manager.
Device Manager.
ECDIS Manager.
Task Manager.
One way to point at the position you want to centre the zoom in and out by pushing function key?
F1 and F2.
F3 and F4.
F5 and F6.
F9 and F10.
Other sensors besides GPS and Gyro are connected to Ethernet based sensor collectors and?
LPT1 Port.
Serial Port.
Parallel Port.
USB Slot.
Scaled icon option can be switched off by which method?
By deactivating «Scaled icon» under Display tab.
By activating «Display» under the Display tab.
By activating «Scaled icon» under the Display tab.
By clicking on «Default» under the Shape tab.
Sensors are picked up locally on the ECDIS by the application called?
Sensor Converter.
Sensor Monitor.
Sensor Manager.
Sensor Receiver.
The Dotted line vector on the ship symbol shows?
Gyro Heading.
True Heading.
Magnetic Heading.
True Heading and Magnetic Heading.
The ENC charts are delivered in which format?
S-57.
CM-93.
S-52.
S-63.
The Editors panel gives access to?
Drawing tools to draw images on the electronic chart.
Editing tools to add text on the electronic chart.
Editing tools to add User data on the electronic chart.
Editing tools to edit data on the electronic chart.
The GPS set position contains datum and offset values for which datum?
WGS 84.
WGS 66.
WGS 72.
NAD 83.
The own ship symbol can be displayed in how many different ways?
1.
2.
3.
4.
The own ship symbol has 2 independent vectors. They are?
Solid line vector and Dotted line vector.
Solid line vector and Broken line vector.
Straight line vector and Broken line vector.
Straight line vector and Dotted line vector.
The position of the panels can be adjusted directly in the console area by?
Clicking and dragging them at the proper place.
Programming of ECDIS system data.
Reconfiguring in the Option menu.
Selecting different panels in the Option menu.
The raster charts are to be considered as?
Pictures copied by scan and fit into the display of the ECDIS system.
Pictures transferred to right shape or projection size, and placed in a geographical grid to fit into the display of the ECDIS system.
Pictures placed in a geographical grid to fit into the display of the ECDIS system.
Pictures transferred into the display of the ECDIS system.
The scaled icon where own ship is drawn in on the screen can be set in?
AIS tab under Ship properties.
Display tab under Ship Properties.
Shape tab under Ship Properties.
General tab under Ship properties.
What does ENC charts abbreviation means?
Electronic Navigation Chart.
Electronic Nautical Catalogue.
Electronic Nautical Chart.
Electronic Navigation Catalogue.
What does the scale indicator displays?
The current scale of the chart and indicates whether the chart is over scaled or not.
The current chart and just show scales value as it is.
The current scale of the chart and indicates whether the chart is under scaled or not.
The previous scale of the chart and indicates whether the chart is under scaled or not.
What is the name of the ECDIS VRM/EBL which is not centered on the ship?
Point to point range and bearing.
Range editor.
VRM/EBL off center.
Point to ship range and bearing.
When Radar is connected to the ECDIS, radar image is shared as well as communication included are route, user data to radar, cursor and?
Alarm Transmission to the ECDIS.
Alarm transmission to the Radar.
Targets transmission to the ECDIS.
Targets transmission to the Radar.
Where can the content of the console be configured?
From the Chart Handling menu.
From the Help menu.
From the Ship Property menu.
From the Option menu.
Where do you find the functions for install charts from a CD?
Chart handling.
Load/Unload.
MDS.
Options.
Where do you open an already stored route?
Load/Unload.
Properties.
Rute plan.
User Editor.
Which optional sensor gives out Navigational warning and messages to ECDIS workstations?
AIS.
ARPA.
GYRO.
Navtex.
Which parameter may trig anti grounding alarms by the ENC?
Safety height, safety contour and safety depth.
Safety contour and safety height.
Safety contour.
Safety depth.
Which sensor on the Monitoring Station can be selected as the Master or as the common reference point for all ECDIS?
GPS.
AIS.
Gyro.
Pilot.
While the configuration has not been frozen the console area can be hidden by selecting «Hide console» in?
Help menu.
Logbook menu.
Chart menu.
Option menu.
You may copy the complete chart database to other ECDIS workstations by?
Copy database in Chart handling.
Share database in Chart handling.
Transfer database in Chart handling.
Transmit database in Chart handling.
Did you find mistake? Highlight and press CTRL+Enter
