Welcome to the website where you can pass online the Mintra test on the subject «Introduction to Abrasive Wheels». Practice like this will help you as a marine specialist improve your knowledge with the help of online studying and appraisal practice. Mintra based on practical information and marine specialists experience.
The Mintra Test Online about Introduction to Abrasive Wheels covers safe use of grinding and abrasive wheel equipment, including correct pre-operation procedures such as inspecting, mounting, dressing, and testing wheels. It also focuses on key safety precautions, hazard awareness, protective measures, and safe working practices to prevent injuries during grinding operations.
Choose the regime, in which you want to pass Mintra test:
Training
Exam
Start test
* Some questions may have more than 1 correct answer.
“Mintra test” finished! Your result:
Correct answers:
⭐
Youve answered 5 questions
Get Premium to unlock the full version of this test, plus 1,000+ other practice exams.
Seafarers who prepare with Premium for just 20 minutes a day are 82% more likely to land their dream job.
There are several steps that must be undertaken before beginning grinding operations:
Step 1: "Sound" the wheel (if appropriate); Step 2: Ensure the wheel is properly clamped to the machine; Step 3: "Dress" and "True" the wheel.
Step 1: "Dress" and "True" the wheel; Step 2: Ensure the wheel is properly clamped to the machine; Step 3: "Sound" the wheel (if appropriate).
Step 1: Ensure the wheel is properly clamped to the machine; Step 2: "Dress" and "True" the wheel; Step 3: "Sound" the wheel (if appropriate).
Which of the following are precautions that must be taken when using portable grinding equipment?
Wheel Flaking.
Slow Grinding Speed.
Fast Grinding Speed.
Wheel "Perspiring".
Excessive Run-out or "Wobble".
Rapid Disc Wear/Short Blade Life.
Which of the following are precautions that must be taken when using portable grinding equipment?
Always ensure that an appropriate guard is in place before you start your work.
Always consider the electrical dangers that may be presented from equipment cables or plugs.
Always carry out a visual check of the equipment to look for signs of damage.
Always ensure there are two points of exit from the grinding location in case of emergency.
Always wear breathing apparatus.
Select the statements which identify safe working practices for the use of abrasive wheels.
To minimise the risk of bursting, abrasive wheels should always be run within the specified maximum rotation speed.
If a wheel is large enough the maximum rotation speed will be marked on the wheel.
Guards must be provided (on all types of wheel) to contain fragments that may fly off if the wheel bursts.
Relevant information and training should be provided to all personnel involved in the use of grinding operations.
For smaller wheels there should be a notice highlighting the maximum speed for each size of wheel.
Guards must be provided (on pedestal grinders only) to contain fragments that may fly off if the wheel burst.
Wheel rotation speeds (for all size of wheel) must be displayed on a notice.
What are the main hazards associated with grinding operations?
Loss of eyesight from flying shards.
Trapped or crushed fingers.
Serious friction burns from coming into contact with the wheel.
Repetitive Strain Injury.
Chemical burns.
Which of the following types of abrasive wheel has a long, wide surface with no centre mounting support or hollow?
Cylinder wheel.
Tapered wheel.
Saucer wheel.
Straight wheel.
Carrying out grinding operations: "Guarding":
The wheel should be guarded so that only the area of the wheel needed for the work is exposed.
There should be no guarding; the whole wheel should be exposed.
Only the area of the wheel needed for the work should be guarded; the non-work area of the wheel should be exposed.
Abrasive wheels are bonded together using ____ or inorganic substances, such as ____ to form a solid circular shape. However, unlike a saw, which has teeth only on its edge, the grinding wheel has abrasive grains distributed ____ the wheel. Thousands of these hard, tough ____ move against the work-piece to cut away tiny chips of material.
... organic ... resin ... saw ... throughout ... grains.
A grinding machine guard has two main functions: the first is to ____ the wheel parts if the wheel ____ and the second is to prevent anyone from coming into ____ with the wheel. Guards must be securely anchored to the machine frame or, if using a portable grinder, an ____ face guard must be worn.
