CES CBT Online Test and Answers for Lifting Equipment

Welcome to the website where you can pass online the CES CBT CD-0319 test on the subject «Periodic Maintenance and Inspection of Lifting Equipment». Practice like this will help you as a marine specialist improve your knowledge with the help of online studying and appraisal practice. CES based on practical information and marine specialists experience.

CES tests developed for evaluating seaman basic knowledge by Seagull Company (rebranded as «OTG»), is an evaluating online-tool, used for revealing any professional preparation needed in specific fields of knowledge, defined by STCW.

CES tests have proven themselves as good tools for the selection and recruitment process, as well as advancing the level of knowledge of the current officers and crew. Ocean Technologies Group use various subjects for question creation, which includes:

Crowd and Crisis Management;
Integrated Navigation System (INS);
Ballast water management;
Handling and Stowage;
Vessel operation management and safety;
Marine engineering;
Maintenance and repair, etc.

Current test contains Seagull CES questions on the subject «Periodic Maintenance and Inspection of Lifting Equipment». Those questions can be used for competence verification specialist capable of preventing accidental situations related with transporting safety, or also for self-examination.

«Periodic Maintenance and Inspection of Lifting Equipment» subject includes theoretical and practical information about advanced training for work on any type of vessel. This subject matter provides a comprehensive understanding of the critical role of lifting equipment in vessel operations. It covers the theoretical and practical aspects of maintaining and inspecting this equipment to ensure safe and reliable operation. This includes understanding the various types of lifting equipment, their limitations and the procedures for their inspection and maintenance. The program may also delve into the relevant regulations and standards related to lifting equipment. Through hands-on training, participants learn to conduct thorough inspections, identify potential hazards and perform necessary maintenance tasks, ensuring the safety and efficiency of the vessel’s lifting operations. This advanced training is crucial for personnel involved in the operation, maintenance and inspection of lifting equipment, contributing to a safer and more reliable maritime industry.

On this site Crew Evaluation System Test on the subject «Periodic Maintenance and Inspection of Lifting Equipment» contains 24 questions you need to answer with no possibility to go back to previous question. Therefore, we recommend carefully reading each question and making decision with no hurry. In case you have some difficulty answering, you have also possibility to request a hint.

Choose the regime, in which you want to pass CES test:

Training

Exam

Wild Mode

* Some questions may have more than 1 correct answer.

“CES test” finished! Your result:

Correct answers:

Try to pass CES test again

Use the search below to find question.

Amount of questions: 24.

Right answers marked with this sign .

Choose ONE option that best completes the following statement. An industry standard …

… does not usually improve safety.

… is a level of quality found within a particular industry.

… is often too high to achieve on a vessel.

… is often too low to be of use on a vessel.

Choose ONE option that best completes the following statement. An equipment standard can be used …

… as the criteria for inspection.

… to calculate the insurance requirement for a vessel.

… to ensure that equipment is rust free.

… to remove all risk.

Choose ONE option that best completes the following statement. A defect found whilst maintaining lifting equipment …

… is reported to the manufacturer of the lifting equipment.

… should be repaired immediately.

… should be reported to management to ensure maintenance is carried out in a safe manner.

… would not affect the maintenance programme.

Choose ONE option that best completes the following statement. Information on the periodic inspection of equipment …

… can be found in the equipment user manual.

… is always very hard to find.

… is never enough to make regular inspections.

… is usually too complicated to follow.

Choose ONE option that best completes the following statement. On a vessel the person inspecting lifting equipment …

… is always from a shore based inspection company.

… will not be the same as the one that maintains it.

… is often the same as the one that has routinely maintained it.

… will complete the task every month only.

Choose ONE option that best completes the following statement. On a vessel, correct maintenance of equipment …

… guarantees its operation for its lifespan.

… does not really extend the lifespan of equipment.

… is an unnecessary task that interferes with the operation of equipment.

… is often in excess of what is needed.

Choose ONE option that best completes the following statement. On a vessel, the people responsible for maintenance and inspection of equipment …

… are usually the chief officer and chief engineer.

… are always difficult to locate.

… are told by the office staff when to undertake the task.

… often do not take their responsibility seriously.

Choose ONE option that best completes the following statement. Oil and gas activity is mostly found …

… in shallow sea areas.

… in deep sea areas.

… in shore locations only.

… in water depths of more than 2 000 metres.

Choose the ONE option that best completes the following statement. The term ’loose gear’ is used to describe …

… all types of baggy work clothing.

… shackles and slings used for lifting.

… the various types of crane hooks found on a vessel.

… unsecured equipment in a locker.

Choose the ONE option that best completes the following statement. When maintaining lifting equipment, for other people’s safety always …

… have the required tools secured at the workplace.

… complete the job during the hours of darkness.

… verbally tell them you are undertaking the work.

… wear a full body safety harness.

Choose the ONE option that best completes the following statement. When maintaining lifting equipment, for your own safety always …

… take safeguards to prevent a fall.

… complete the job during daytime.

… have a workmate with you.

… have the required tools in a bag.

Choose the ONE option that best completes the following
statement. When maintaining lifting equipment, for your own safety always …

… have one hand for the job and one for yourself.

… undertake the job in daylight hours.

… wear all the correct PPE.

… wear a hard hat.

How can a vessel find out if there are any local or regional standards which must be followed? Select the ONE best answer.

Check in a vessel’s ISM code.

Check with the oil company or charterer.

Check in the notices to mariners.

Check with the country’s safety agency.

How can one standard be applied to all vessel types? Select the ONE best answer.

The standard will relate to items common to all vessel types.

It cannot, as all vessels are different and require individual standards.

The standard is set at a very low level.

The standard only relates to the quality of the materials used.

If third party lifting equipment is used on a vessel, what should the vessel’s management be told about it? Select the ONE best answer.

How often it will be maintained by the vessel’s crew.

That it is maintained and inspected to a recognised standard.

Where the equipment was built, as this may affect its quality.

Which manufacturer has produced the equipment.

What is a crew person’s responsibility when they are maintaining lifting equipment? Select the ONE best answer.

To complete the operation in a safe manner.

To complete the operation as soon as possible.

To replace as few components as possible.

To save the company money by not having a manufacturer’s representative present.

What should a crane be inspected for, before and after use? Select the ONE best answer.

Any visible damage, controls not working and functionality.

Any cosmetic maintenance required on it.

To make sure it will take its safe working load.

To see that it complies with a classification society’s requirements.

When maintaining equipment in a high place, how are others below the work area best protected? Select the ONE best answer.

By attaching everything that may drop to the work area.

By having a barrier below the work area, to ensure that no people are underneath in case of any dropped objects.

By only completing the work at night, when others are not around.

By posting up notices that work is being undertaken at height.

Which one of these statements best describes the term ’lifting equipment’? Select the ONE best answer.

Any equipment used to lift a load or connect it to a hook.

Cranes and gantries but not shackles.

Cranes used only for stores.

Shackles and slings but not cranes.

Who should carry out an inspection of lifting equipment on a vessel? Select the ONE best answer.

An operator before they use the lifting equipment.

An engineer officer only.

The manufacturer’s representative only.

The vessel managers only.

Who should maintain and inspect lifting equipment on a vessel? Select the ONE correct answer.

Those persons qualified for the task.

Any of the vessel’s crew.

Only manufacturers’ representatives.

Only the engineering staff onboard.

Why is a daily or periodic inspection of lifting equipment important for crew? Select the ONE best answer.

To ensure it is safe to operate.

To check that the equipment is in working order.

To circulate oil in the hydraulic system.

To comply with a company’s requirements.

Why is it important to have standards for lifting gear inspection and maintenance? Select the ONE best answer.

To be able to maintain quality and meet or exceed minimum requirements.

So that the vessel crew have records to keep.

To be able to maintain quality and follow maximum requirements.

To be used for blame if an accident occurs.

Why must an offshore vessel know if there is a regional standard? Select the ONE best answer.

A vessel will have to comply with the standard when working in that region.

A vessel will have to change all of its procedures to suit it when working there.

It does not need to know, because a vessel’s own standard will be the same.

It does not need to know, because regional standards can generally be ignored.