.
Site categories
1/ Help
:

# Questions and answers to Crew Evaluation System Test about Doppler log

This page contains answers to Seagull CES test about Doppler velocity log, and serve as a database of questions and answers, using which seafarer can prepare to exams for getting certificate of competence, or just to challenge yourself with knowledge in this theme.

Use the search below to find question.

Amount of questions: 10.

Right answers marked with this sign .

Aerated water can affect a Doppler log. Which one of the options is the most likely to produce aerated water?
Passage through a shoal of fish.
Varying density layers caused by water temperature differences.
The wake caused by the other ships propellers.
The Doppler log loses “Bottom track”.
Select the option, which correctly completes the following statement: “If undisturbed reverberation measurement in shallow water is not possible, the system automatically switches to…”:
Water track.
Docking mode.
Bottom track.
Select from the options given six factors, that are likely to affect a Doppler log system:
Density differences in water.
Loss of signal or weak signal.
Aerated water.
Loss of bottom track.
Loss of water track.
Orientation of the transducer.
Which mode is the most suitable to use if the primary function of the connected ARPA is traffic surveillance?
Bottom track.
Water track.
Track mode.
Which one of the following statement depends on the “Janus configuration”?
Small errors due to sound velocity.
Small errors due to salinity and density.
Small errors due to trim, roll and pitch.
High sound energy.
Which one of the modes given in the options should be used when the Doppler log is connected to an ARPA-radar, which is primarily used for traffic surveillance (according to IMO-rules)?
Bottom track.
Sailing mode.
Water track.
Docking mode.
Which one of the modes given in the options should be used, when the Doppler log is connected to an autopilot with track keeping functions?
Bottom track.
Sailing mode.
Water track.
Docking mode.
Which one of the options identifies when the Doppler log would normally be switched off?
The Doppler log should never be switched off.
At sea, during daylight hours.
During dry-docking.
Which one of the options is the most likely reason, that a Doppler log’s operation might be disturbed during docking operations?
Due to aerated water from the backwash from own propeller.
Due to interference from the GPS-speed.
Due to the orientation of the transducer.
Due to weak signal (normal in harbour areas).
Which one of the options is the type of measurement used by the Doppler log?
Frequency measurement.
Time measurement.
Hyperbola measurement.
NMEA-0183 measurement.

Did you find mistake? Highlight and press CTRL+Enter

Апрель, 04, 2022 683 0
Favorite articles
• Список избранных статей пуст.

Here will store all articles, what you marked as "Favorite". Articles store in cookies, so don't remove it.

$${}$$