Site categories

Crew Evaluation Test online about Remote Control System AutoChief4

“Seagull CES test online about Remote Control System AutoChief4 (AC4)” (Crew Evaluation Test) will help marine specialists in preparation to exams for getting certificate of confidence.

Choose mode in which you want take “CES test”:

Practice - CES test Remote Control System
Exam - CES test Remote Control System
Start test
An order printer unit is fitted at:
The bridge.
The Engine Control Room.
The emergency control el. box.
The Local control.
Принять ответ
AutoChief 4 is the fourth generation of remote control system for:
Medium speed diesel engine.
High speed diesel engine.
Low speed main engine by New Sulzer Diesel or MAN B&W.
All types of main engine.
Принять ответ
Digital Governor Unit receives speed command through:
ECR Telegraph.
Speed Set Lever.
Принять ответ
During Bridge Control Manoeuvring the Starting and Stopping of Main Engine is done with the help of:
Bridge Telegraph.
Speed set lever.
Engine RPM Indicator.
Принять ответ
During Engine Control Room Manoeuvring the Main Engine is Started and Stopped with the help of:
Bridge Telegraph.
Speed set lever.
Engine RPM Indicator.
Принять ответ
During normal operation from Bridge the Main Engine can be stopped by:
Bridge Telegraph.
Speed set lever.
Engine RPM Indicator.
ECR telegraph.
Принять ответ
Engine Room Panel is subdivided into how many fields?
Принять ответ
From where does AutoChief 4 takes RPM command information?
Bridge telegraph lever.
Speed set lever.
Принять ответ
How does the bridge unit transfer command to ECR unit?
Serial communication.
Parallel communication.
Принять ответ
How many pick-ups are fitted for detection of RPM?
Принять ответ
If you are manoeuvring from Engine Control Room, will the telegraph order be recorded at the Bridge OPU?
Принять ответ
In AC4 remote control system, manoeuvring of ME can be carried out from:
Engine Control Room.
Engine Room Panel.
From all three locations.
Принять ответ
Indication Field contains ____ indication lamp.
Принять ответ
Name the field that contains “Rough Sea Mode” function:
Other functions field.
Command position field.
Cancel function field.
Miscellaneous field.
Принять ответ
Pneumatic Valve Cabinet controls:
All three functions of Main Engine.
Reversing of Main Engine.
Stopping of Main Engine.
Starting of Main Engine.
Принять ответ
Slow turning Diode will be illuminated when Engine has been stopped for:
More than 30 minutes.
More than 20 minutes.
More than 40 minutes.
More than 15 minutes.
Принять ответ
Start Air Transducer detects:
Starting air pressure.
Engine RPM.
Available air pressure in the Engine room.
Принять ответ
System Warning & System Fail indication will be activated when:
The RPM Detector system has failed.
The Safety System Unit is malfunctioning.
The Engine fails to start.
The Engine failed to reverse.
Принять ответ
The bridge panel is subdivided into how many fields?
Принять ответ
The fuel rack of the engine is regulated by:
Electric Actuator.
Pneumatic Actuator.
Digital Governor Unit (DGU).
Принять ответ
The function of Engine Control Room Telegraph is to:
Accept Bridge order.
Change Engine RPM.
Start and stop engine.
Принять ответ
The main purpose of telegraph lever is:
To give only direction.
To give only RPM Command to Engine.
To give both, direction and RPM Command.
Принять ответ
The pick-up for measuring RPM is located:
In the Control Room.
On the Bridge.
At the Engine Fly Wheel.
At the Engine Panel.
Принять ответ
The reversing of Main Engine is done through a set of:
Solenoid valves.
Mechanical linkage.
Pneumatic valves.
Hydraulic valve.
Принять ответ
The speed set lever controls:
The Main Engine Speed.
The direction of Main Engine.
Speed as well as start & stop o Main Engine.
Принять ответ
What are the functions of “Cancel” buttons?
To cancel Engine Shut-down function.
To cancel Slow-down function.
To cancel Speed Limitation.
All the three functions.
Принять ответ
What component is installed at all three locations in AC4 remote control unit?
Order printer unit.
Speed-set lever.
Safety system unit.
A telegraph panel.
Принять ответ
What is this?


This is the Emergency Control El-box, used for informing the operator about safety actions and direction of rotation as well as for cancelling shut-downs and emergency stop.
This is the local Telegraph Unit, used for receiving and acknowledge of manoeuvre orders from bridge, when the engine is controlled from local stand.
This is the electric Actuator, used for regulating the supply of fuel to the main engine.
Принять ответ
Which one is not a part of Safety System Unit?
Start Failure Alarm.
Shut-down Alarm.
Over Speed Alarm.
Принять ответ
Which one of the following statement are true?
The fourth generation of remote control system for low speed main engines made by New Sulzer Diesel or MAN B&W.
The fourth generation of signals control system for high speed main engines made by New Sulzer Diesel or MAN B&W.
The third generation of signal control system for high-speed main engines made by New Sulzer Diesel or MAN B&W.
Закончить тест
* In some questions may be more, than one right answer.
“CES test” finished! Your result:

Did you find mistake? Highlight and press CTRL+Enter

Март, 25, 2022 530 0
Добавить комментарий

Favorite articles

Here will store all articles, what you marked as "Favorite". Articles store in cookies, so don't remove it.

Article added to "Favorite list"! Reload...