.
Our site needs your help!
Site categories
1/ Help
:

SETS (Seafarer Evaluation Training System) Test Online for Seamen on Construction

Join Our Telegram (Seaman Community)

Welcome to the website where you can pass online the Seafarer Evaluation Training System (SETS) test on «Construction». Practice like this will help you as a marine specialist improve your knowledge with the help of online studying and appraisal practice. SETS based on practical information and marine specialists experience.

SETS tests developed for evaluating seaman basic knowledge by company “Naval Education Services” is an evaluating online-tool, used for revealing any professional preparation needed in specific fields of knowledge, defined by STCW Section A-V/1-2.

SETS tests have proven themselves as good tools for the selection and recruitment process, as well as advancing the level of knowledge of the current officers and crew.

Current test contains SETS questions in area «Construction». Those questions can be used for competence verification specialist capable of preventing accidental situations related with transporting safety, or also for self-examination.

«Construction» subject includes theoretical and practical information about advanced training for work on any type of vessel. The test evaluates knowledge and skills related to the design, building and maintenance of various types of vessels. It covers essential topics such as ship structural components, materials used in construction and the principles of hull design for stability and strength. Candidates will be assessed on their understanding of construction standards, safety regulations and compliance with international maritime guidelines. The test includes practical tasks that simulate real-world scenarios, such as identifying structural defects, interpreting blueprints and planning repair procedures. Theoretical questions will focus on advanced concepts like load distribution, corrosion prevention and the integration of modern technologies in vessel construction. Successful completion of the test demonstrates the ability to contribute to the construction, inspection, or refitting of any type of vessel, from small yachts to large commercial ships. This assessment is designed to ensure that maritime professionals are equipped to uphold the highest standards of quality and safety in shipbuilding and maintenance.

On this site SETS on the subject «Construction» contains 40 questions you need to answer with no possibility to go back to previous question. Therefore, we recommend carefully reading each question and making decision with no hurry. In case you have some difficulty answering, you have also possibility to request a hint.

Choose the regime, in which you want to pass SETS test:

Training - SETS test
Training
Exam - SETS test
Exam
Wild Mode
* Some questions may have more than 1 correct answer.
“SETS test” finished! Your result:
Correct answers:

Use the search below to find question.

Amount of questions: 40.

Right answers marked with this sign .

The lower end of the stem bar of a ship is attached to a……..
stringer.
frame.
beam.
keel plate.
What stresses are the vessel’s structure forward of the collision bulkhead stiffened to resist?
Panting & Pounding.
Panting & Racking.
Water Pressure.
Hogging & Sagging.
Additional bottom stiffening is required immediately aft side of the collision bulkhead to resist……..
racking.
panting.
pounding.
hogging.
What is the type of framing shown in the ship cross section?

Scheme 1

Transverse.
Longitudinal.
Combination.
Web.
A General Arrangement drawing gives details of a vessel’s….
construction sequence.
tank capacities.
hydrostatic information.
layout.
What is the minimum number of transverse bulkheads required for a vessel with machinery aft?
Three.
Four.
Five.
Six.
Racking stresses in a ship can be reduced by fitting a good system of……
stringers.
deck girders.
side girders.
bulkheads.
What stress is the connection of frames and beams at deck level between the bulkheads designed to resist?
Hogging.
Sagging.
Racking.
Pounding.
What is the type of weld shown in the figure?

Scheme 2

Fillet.
Butt.
Vee Butt.
Lap.
What is the pipe which directs the anchor cable from the windlass to the chain locker called?
Mooring.
Hawser.
Spurling.
Scupper.
In the figure, what is the section marked 4 called?

Scheme 3

Flat Bar.
Tee.
Angle.
Offset Bulb.
What is distortion of a vessel’s structure caused by rolling called?
Racking.
Slamming.
Pounding.
Heaving.
Gross tonnage is defined as….
earning capacity.
internal capacity.
light displacement.
load displacement.
What is the connecting plate between a side frame and a transverse deck beam called?
Bracket.
Gusset.
Knee.
Stiffener.
What is the type of rudder shown in the figure?

Scheme 4

Unbalanced.
Semi-balanced.
Balanced.
Spade.
What is a keel structure constructed to allow piping to run through called?
Bar Keel.
Flat Plate Keel.
Box Keel.
Duct Keel.
What are bulkhead stiffeners attached to the tank top by?
Cleats.
Brackets.
Stays.
Chocks.
How are stacked containers prevented from moving in the hold?
By girders.
By wire lashings.
By portable beams.
By cell guides.
What is the uppermost continuous hull plating called?
Sheer Strake.
Garboard Strake.
Stealer Plate.
Stringer Plate.
What is the item shown in the figure?

Scheme 5

Stay.
Strut.
Bulwark Stanchion.
Stiffener.
Moulded beam is the measurement taken to the………
inside of the plating.
outside of the plating.
inside of the frames.
inside of the ceiling.
What is the longitudinal curve of the deck called?
Sheer.
Freeboard.
Rise of Floor.
Rake.
What is the transverse curve of the deck called?
Flare.
Rake.
Camber.
Tumblehome.
A vessel in the condition shown in Figure 1 will be….

Scheme 6

hogging.
sagging.
racking.
twisting.
Where are panting stresses for a ship most severe?
Forward.
Amidships.
Aft.
Between the bulkheads.
What is the condition in which the greatest pounding stresses in a ship are liable to occur?
Loaded, beam sea.
In ballast, beam sea.
Loaded, head sea.
In ballast, head sea.
What is the weight a vessel can carry called?
Load Displacement.
Gross Tonnage.
Registered Tonnage.
Deadweight.
What is the hinge on which a rudder turns called?
Bolt.
Pin.
Gudgeon.
Coupling.
When a vessel is hogging the keel will be in……..
sheer.
tension.
torsion.
compression.
What is the item of structure numbered 11 in the figure called?

Scheme 7

Bulkhead.
Floor Plate.
Wash Plate.
Web.
To prevent water entering the space below, door openings on the weather deck should be constructed with approved……..
drains.
sills.
scuppers.
baffles.
What is the vertical distance top to top between the load line marks S and F?
Summer Allowance.
Tropical Allowance.
Dock Water Allowance.
Fresh Water Allowance.
The vertical distance measured from the deck line to the centre of the load line disc is the……..
depth.
winter draught.
summer draught.
statutory freeboard.
At sea, water is self-drained from an exposed deck by……..
discharge pipes.
side scuttles.
freeing ports.
drain valves.
What is a drawing used to identify individual strakes and plates called?
Construction Drawing.
Sheer Profile.
Shell Expansion Plan.
Body Plan.
What is the item of structure numbered 9 in the figure?

Scheme 7

Deck Plate.
Panting Stringer.
Foundation Plate.
Floor Plate.
What is the item of structure numbered 12 in the figure called?

Scheme 4

Boss Plate.
Stern Bearing.
Stern Post.
Stern Frame.
In ideal conditions, the forward distance a propeller will move in one revolution of the shaft is the:
Diameter.
Pitch.
Slip.
Circumference.
In the figure, what are the items marked 6 called?

Scheme 9

Chocks.
Bilge Brackets.
Knees.
Webs.
What is the item of structure numbered 10 in the figure called?

Scheme 7

Breast Hook.
Diamond Plate.
Bracket.
Bow Chock.

Did you find mistake? Highlight and press CTRL+Enter

Апрель, 05, 2025 53 0
SOC.MEDIA Telegram Vkontakte Facebook Odnoklassniki Instagram
Добавить комментарий