Welcome to the website where you can pass online the CES test on the subject «Deck, Support, Container Vessel». Practice like this will help you as a marine specialist improve your knowledge with the help of online studying and appraisal practice. CES based on practical information and marine specialists experience.
CES tests developed for evaluating seaman basic knowledge by Seagull Company (rebranded as «OTG»), is an evaluating online-tool, used for revealing any professional preparation needed in specific fields of knowledge, defined by STCW.
- Test type: STCW.
- Version: 5.2.7.
- Department: Deck.
- Level: Support.
- Vessel type: Container Vessel.
CES tests have proven themselves as good tools for the selection and recruitment process, as well as advancing the level of knowledge of the current officers and crew. Ocean Technologies Group use various subjects for question creation, which includes:
- Crowd and Crisis Management;
- Integrated Navigation System (INS);
- Ballast water management;
- Handling and Stowage;
- Vessel operation management and safety;
- Marine engineering;
- Maintenance and repair, etc.
Current test contains Seagull CES questions on the subject «Work on Container Vessel». Those questions can be used for competence verification specialist capable of preventing accidental situations related with transporting safety, or also for self-examination.
«Deck, Support, Container Vessel» subject includes theoretical and practical information about advanced training for work on container vessel. Knowledge of this information directly shows employee’s competence who holds a relevant post on a vessel. A seafarer’s work on a container ship demands exceptional organization and responsibility. They are responsible for loading and unloading containers, requiring precise weight distribution to ensure the vessel’s stability. Seafarers must also be well-versed in the ship’s technical aspects and capable of responding promptly to any unforeseen circumstances.
Furthermore, container ships often operate on international routes, involving extended periods at sea and prolonged separation from family and friends. This necessitates a high degree of stress resilience and adaptability to various onboard living conditions. Safety and environmental standards are rigorously upheld, given that container ships transport substantial cargo volumes, making the avoidance of accidents crucial.
On this site Crew Evaluation System Test on the subject «Work on Container Vessel» contains 108 questions you need to answer with no possibility to go back to previous question. Therefore, we recommend carefully reading each question and making decision with no hurry. In case you have some difficulty answering, you have also possibility to request a hint.
Start test
Code: EODR On the figure there are four (4) possible definitions of the term “AFT” shown. Which one is the correct one?
Aft is defined as A on the figure.
Aft is defined as C on the figure.
Aft is defined as B on the figure.
Aft is defined as D on the figure.
Next question
Code: GRRY Why should a container with a damaged corner post not be loaded?
Because its strength is weakened.
Because during discharge the ship could be held responsible for the damage.
Because it will not fit properly into a container stack.
Show results
Code: DBSU On the figure there are four (4) possible definitions of the term “BOLLARD” given. Which one is the correct one?
Bollard is given by C on the figure.
Bollard is given by D on the figure.
Bollard is given by B on the figure.
Bollard is given by A on the figure.
Next question
Code: KBJS In the diagram, which arrow is pointing at the position known as the “Bridge”?
The Bridge is indicated by A in the figure.
The Bridge is indicated by D in the figure.
The Bridge is indicated by B in the figure.
The Bridge is indicated by C in the figure.
Next question
Code: AXYU On the diagram, which letter indicates what is meant by the word “DRAUGHT” of the ship?
Draught is indicated by B, in the figure.
Draught is indicated by C, in the figure.
Draught is indicated by D, in the figure.
Draught is indicated by A, in the figure.
Next question
Code: IVGQ On the figure there are four (4) possible directions, shown by the arrowed lines, which could be the correct direction associated with the term “HEAD LINE”. Which one is the correct one?
Head line is given by B on the figure.
Head line is given by C on the figure.
Head line is given by D on the figure.
Head line is given by A on the figure.
Next question
Code: ICYJ On the figure there are four (4) possible definitions of the term “WINDLASS”. Which one is the correct one?
Windlass is given by B on the figure.
Windlass is given by C on the figure.
Windlass is given by D on the figure.
Windlass is given by A on the figure.
Next question
When you join a new ship, how are you informed about safety rules, alarm instructions and your own duties in case of an emergency?
By muster lists exhibited in conspicuous places.
By oral instructions by the Captain.
By safety manuals distributed to crew members.
By emergency drills conducted weekly.
Принять ответ
If a vessel “Overshoots” its heading, what has happened?
When turning, it is when the vessel swings past the required heading.
It is the way a vessel turns when putting the helm in a hard over position.
It refers to the vessel moving faster than its intended speed.
It indicates the vessel has lost its steering control.
Принять ответ
With reference to crane operations, the term “slewing” refers to:
Turning or rotating a crane boom.
Making a (travelling) crane move along its rails.
Lifting a load vertically.
Lowering the crane to the ground.
Принять ответ
How will you act if you are helmsman and the person conning the vessel gives you the order: ”Nothing to port”?
Don’t allow the ship to swing at all to port.
Alter the ship’s course to starboard.
Increase speed to maintain course.
Turn the ship hard to starboard.
Принять ответ
Welding and flame cutting are among the factors which give the highest risk of fire on board ships. Precaution has to be taken to avoid this risk. Which of the following safety rules may be regarded as the most important?
The welder shall have been instructed in the use of the ship’s welding plant.
Only holders of welding certificates shall be allowed to carry out welding on board ships.
All crew members must wear fire-resistant clothing during welding operations.
A fire watch must be present during all welding activities.
Принять ответ
For which of the following groups of substances or materials is the use of water as an extinguishing agent dangerous?
Sodium hydrosulphite, potassium hydroxide, magnesium.
Gas-oil, oily rags, synthetic textiles.
Wood, paper, and cardboard.
Electrical equipment and appliances.
Принять ответ
Which of the following measures should be applied when hot work is to be undertaken in a harbour?
To have a hot-work permit.
All the answers are good.
To ensure fire-fighting equipment is readily available.
To notify the harbour master before starting work.
Принять ответ
What is the greatest interest of the “help” position?
It lessens the survivor’s heat escape.
It lessens the survivor’s fatigue.
It allows for better visibility in the water.
It helps in attracting attention for rescue.
Принять ответ
What is advisable for a person entering a padlocked refrigerated room?
He should take the padlock inside the room.
He should never remove any ice or debris as the ice is needed to keep the refrigerated room at the right temperature.
He should ensure the door is left slightly ajar for ventilation.
He should inform someone outside before entering.
Принять ответ
Which of these types of information is considered sensitive?
Voyage itinerary and departure and arrival times.
Planned maintenance schedule and emergency response procedures.
Crew member contact information.
Safety equipment inventory.
Принять ответ
The lashing of containers loaded in the fourth and fifth tiers on a container ship are lashed with:
The lashing bridge.
Long lashing rods.
Standard lashing chains.
Ratchet straps.
Принять ответ
On a Container vessel, fixed stacking cones are positioned:
At the base of cell guides.
Between containers in under-deck stowage locations.
On top of the containers in the upper tiers.
Along the sides of the container holds.
Принять ответ
On a Container vessel, when preparing to lift hatch pontoons it is necessary to secure all loose material on it, so as to:
Ensure that pontoons are not fouled by loose material whilst being lifted.
Ensure that vessel is in compliance with this international requirement.
Prevent damage to the hatch cover during lifting.
Facilitate quicker lifting operations.
Принять ответ
Within the context of containerisation, Dangerous Goods are:
Goods that are liable to cause damage to the ship.
Substances, materials and articles covered by the International Maritime Dangerous Goods (IMDG) Code.
Items that require special handling during loading and unloading.
Goods that are prohibited from being transported by sea.
Принять ответ
Containers carried on multi-purpose or general cargo ships may be lashed with lashing wires and chains, if:
Such provision has been provided for in the vessel’s Cargo Securing Manual (CSM).
This is done together with dedicated container lashing equipment.
The containers are loaded in the lower tiers only.
The ship is equipped with additional lashing points.
Принять ответ
On a Container vessel, the person responsible for the safe lashing and securing of containers is:
The master.
The chief officer.
The cargo officer.
The deckhand in charge of lashing.
Принять ответ
The term “IMDG” stands for:
International Maritime Dangerous Goods.
Interactive Maritime Dangerous Goods.
International Marine Delivery Guidelines.
Integrated Maritime Dangerous Goods.
Принять ответ
If a conscious patient is bleeding from the nose:
Apply pressure (pinch) to the soft part of the nose for 10 minutes while keeping the head forward over a basin.
Ask the patient to lie flat on the floor.
Tilt the patient’s head back to stop the bleeding.
Use a cold compress on the forehead.
Принять ответ
When first using a cleaning agent in the machinery space, the crew should:
Confirm that it won’t form an emulsion.
Confirm that it will form an emulsion.
Check the cleaning agent’s expiration date.
Ensure proper ventilation in the machinery space.
Принять ответ
When lifting the container vessel’s hatch pontoons, you should stop the operation if the:
Ship has an excessive heel.
Wind and swell are more than force 5.
Visibility is reduced due to fog.
Temperature exceeds safe working limits.
Принять ответ
A fibre glass yacht, lifted and loaded on board a container vessel would be expected to be secured with:
The cradle.
Flatrack.
Standard lashing equipment.
Container straps.
Принять ответ
Where can it be verified that the ship’s equipment complies with the requirements of MARPOL Annex VI?
The IAPP certificate.
The IOPP certificate.
The ISM certificate.
The SMC certificate.
Принять ответ
Where is the “FORECASTLE” in the figure?
The Forecastle is indicated by B.
The Forecastle is indicated by C.
The Forecastle is indicated by A.
The Forecastle is indicated by D.
Принять ответ
In the diagram, which letter is indicating the “bitts” which would probably be used by the mooring the ship?
The bits for the Forward Spring is indicated by D, in the figure.
The bits for the Forward Spring is indicated by B, in the figure.
The bits for the Forward Spring is indicated by C, in the figure.
The bits for the Forward Spring is indicated by A, in the figure.
Принять ответ
Where is the “PORT QUARTER”, in the figure?
The Port quarter is D in the figure.
The Port quarter is A in the figure.
The Port quarter is B in the figure.
The Port quarter is A in the figure.
Принять ответ
Which is the “CAPSTAN” in the figure?
The Capstan is indicated by A in the figure.
The Capstan is indicated by B in the figure.
The Capstan is indicated by C in the figure.
The Capstan is indicated by D in the figure.
Принять ответ
In the diagram, which letter is indicating the position “MIDSHIPS”?
Midships is indicated by B in the figure.
Midships is indicated by D in the figure.
Midships is indicated by C in the figure.
Midships is indicated by A in the figure.
Принять ответ
Where is “AFT” in the figure?
Aft is A.
Aft is B.
Aft is C.
Aft is D.
Принять ответ
Code: HHIJ On the figure there are four (4) possible definitions of the term “CENTRE LINE”. Which one is the correct one?
Centre line is given by C on the figure.
Centre line is given by B on the figure.
Centre line is given by D on the figure.
Centre line is given by A on the figure.
Next question
Code: OWGN “Overshoot” is an expression we use when talking about a ship’s steering ability. What is the definition of this expression?
It is how many degrees a ship continues to turn after you apply counter rudder.
It is the way a ship turns when you put the helm in a hard over position.
It is the way a ship shoots forward when you give “a kick ahead”.
It is the way a ship continues to turn when the helm is put amidship.
Next question
Code: WTWR Read the text in and answer the question: “What should be given to prospective seafarers”? It is recommended that every prospective seafarer should, before being employed in a sea-going ship, receive proper training in personal survival techniques. In respect of such training several recommendations are made.
Passport and visa.
Approved training in survival techniques.
Recommendations.
Survival and protective clothing.
Next question
Code: YXWW When acting as helmsman would you expect the reading of the gyro compass to be the same as the magnetic compass?
Very seldom would they be the same.
They would always be the same.
They would always be within 1 or 2 degrees of each other.
They would never be the same.
Next question
Code: TCQW What does the term “Hard a Starboard” or “Hard to Starboard” mean?
The wheel is difficult to turn to starboard.
Do not allow the vessel to swing to port.
Put the wheel fully over to starboard.
Start the ship swinging to starboard.
Next question
Code: OSDQ Who is authorised to operate lifting equipment around the ship?
Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the procedures as outlined in the ship’s SMS system.
Stevedores, manufacturer’s maintenance engineers and senior ratings only.
All deck officers and ratings.
Deck officers and ratings, engineering officers and ratings, GP crew if applicable, who are in possession of crane operation training certificates issued by the company.
Next question
Code: ELPO When two ships are lying alongside each other in a ship to ship operation and one ship is lying at anchor, anchor watch duties must be carried out as follows:
Anchor watches are not kept as the duty officers will be on deck conducting the cargo operations.
Anchor watch responsibility rests with the vessel which has its anchor down and the ship to ship connections is the responsibility of the other vessel.
Both ships have normal anchor watch responsibility in addition to watching ship to ship fendering, mooring etc.
Next question
Code: BFIR Breathing apparatuses is an important piece of equipment for being able to fight a fire onboard a vessel. What routine precautions to be observed with regard to use and maintenance of such equipment?
All the mentioned alternatives.
That personnel having a beard are not selected as smoke divers.
That personnel that are appointed as smoke divers, primarily are given a shore based proper basic education and training.
That the equipment always to be kept cleaned, checked and bottles are recharged immediately upon use, and frequently inspected.
Next question
Code: TKRN What kind of extinguishing-remedy would you choose to put out an electrical fire?
Dry extinguishing remedy.
Water.
Combination of powder and water.
Foam.
Next question
Code: QYUD What kind of safety clothing should be worn during a mooring operation?
Gloves and helmet.
Safety shoes and boiler suit.
Helmet, safety shoes, gloves and protective clothes.
No particular safety clothes are required.
Next question
Code: KLAP What is the meaning of “Make Fast”?
Make Fast means to secure a rope.
Make Fast means to avoid all meals.
Make Fast means to act very quickly.
Make Fast means to coil a rope.
Next question
Code: FNCM What is understood by the term “Boat Drill”?
“Boat Drill” is an exercise to launch the lifeboats and move the boats clear of the ship.
“Boat Drill” is an exercise in the practical and safe methods to secure a boat alongside the ship.
“Boat Drill” means the practical training in the various aspects of getting all the people onboard safely off the ship, in the event of abandoning ship.
Next question
Code: HFRA, KEKN Give the meaning of the following symbol:
Fasten seat belts.
Fasten lifejacket belt.
Secure hatches.
Secure buoy line to the ship.
Next question
Code: FUKP, HDKP How much food per person is supplied on a liferaft?
Not less than 20 000 kJ.
Not less than 5 000 kJ.
Not less than 10 000 kJ.
None, only barley sugar sweets supplied.
Next question
Code: AECJ A drip tray containing oil is on fire. The only fire-fighting equipment available is water hose with spray jet/spray nozzle. How, if at all, should you attempt to put out this fire using water?
The water can be applied in a fine spray starting from the front in a sweeping motion.
Water should be applied in a jet to the back of the fire.
Water should be applied to the oil in a single jet only.
Water should not be used on any type of oil fire.
Next question
Code: SKFX Which of the following are frequent causes of fires in accommodation?
1. Smoking in bed. Covering of electric fires with blankets. 3. Overloading electric plugs.
Covering of electric fires with blankets.
Smoking in bed.
Overloading electric plugs.
Next question
Code: AIGK What is the main responsibility of a bridge lookout at night?
Inform bridge of changing weather patterns.
Inform bridge of any lights when they appear over the horizon.
Inform bridge of any other ships observed, which appear to be getting closer to your own ship.
Inform the bridge of any new lights when they appear over the horizon or any other items observed which may affect the ship.
Next question
Code: VPHS During restricted visibility, you are posted as bridge lookout and you hear 1 long blast at intervals of about 2 minutes on your port bow. What will you report to the OOW (officer on watch)?
Fog signals of one long blast heard on the port bow.
Power driven vessel under way and making way on the port bow.
A vessel at anchor on port bow.
Power-driven vessel making no way on port bow.
Next question
Code: RXCL What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Starboard ten”?
Repeat the command back and then change course 10 degrees to starboard of present course.
Fog signal of one long blast heard on the port bow at regular intervals of about 2 minutes.
Repeat the command back and then put the wheel over sufficiently for the ship to swing at a rate of 10 degrees per minute to starboard.
Next question
Code: IIES How will you act if you are helmsman and the OOW (officer on watch) gives you the order: “Nothing to port”?
Don’t let the ship turn to port.
Let the ship turn to starboard.
Alter course to starboard.
Don’t give port rudder.
Next question
Code: ITPC What is the signal actuated by a detection system?
A visual and audible alarm signal at the control panel.
An audible signal at the control panel.
An audible and visual signal consisting in 7 short signals followed by a long one.
A visual signal at the control panel.
Next question
Code: YJGQ What are the main components of the atmospherical air?
O2: 21 %; N2: 72 %; H2O: 5 %; CO2: 2 %; Rare gases: traces.
O2: 75 %; N2: 10 %; H2O: 5 %; CO2: 5 %; Rare gases: traces.
O2: 21 %; N2: 78 %; H2O: traces; CO2: traces; Rare gases: traces.
Next question
Code: DQKN In which one of the following an oil, the flash point of which only needs to be over 43 °C, may be used?
In emergency generators.
In the main engine.
In the kitchen.
In inert gas generators.
Next question
Code: OJHE A stevedore is working in a cargo hold of a bulk carrier while completing discharge of a concentrate cargo. You suddenly notice that he appears to be taken ill. You should:
The foreman stevedore will deal with this situation.
Assume problem due to lack of oxygen and/or toxic gas and rescue with self-contained breathing apparatus.
Immediately enter space and give first aid.
Assume possible heart attack and give CPR.
Next question
Code: CTSK On a bulk carrier at the completion of loading and before closing hatch covers, the track ways must be:
Track ways swept and checked clear of obstructions.
No sweeping required.
Track ways washed down.
No specific checks.
Next question
Code: NFRF When preparing the hold of a bulk carrier for cargo when that hold has previously been ballasted, which of the following must be checked?
Previous cargo swept out.
The heating coils fitted.
Paint coating re-painted.
The ballast lines must be blanked off and the bilge lines opened and tested.
Next question
Code: RUUF What must be done after completion of ballasting operations on a bulk carrier?
All valves closed, tank ventilators in open position and sounding pipe caps replaced.
Sounding pipe caps left off.
All valves and lines left open.
All valves closed and tank ventilators to closed position.
Next question
Code: ISUD Which of these series of sizes corresponds to the international standard for nozzles?
10 mm and 20 mm.
10 mm, 20 mm and 30 mm.
5 mm, 10 mm and 20 mm.
12 mm, 16 mm and 19 mm.
Next question
Code: NXCC What alarm signal must be sounded by the alarm bells in case of fire?
The signal which is stated in the muster list.
A continuous signal.
Series of short blasts.
One long blast followed by seven short blasts.
Next question
Code: BIWP Give the meaning of this symbol:
Lifebuoy.
Lifebuoy with line.
Lifebuoy with light.
Lifebuoy with light and smoke.
Next question
Code: SPAG Which part of the float-free arrangement for inflatable liferafts is made to release the liferaft after being automatically inflated during the ship is sinking?
The lashing strap.
The hydrostatic release unit.
The weak link.
The painter.
Next question
Code: HYDL The wearer of a lifejacket can jump into the water without injury and without damaging the jacket from a height of at least:
4,5 m.
7 m.
12 m.
10 m.
Next question
Code: YXCS A person wearing an adult lifejacket shall be able:
To swim a short distance through the water and board a survival craft.
To dive half a meter under the water surface.
To jump from any height into the water without being injured or damaging the lifejacket.
To swim half a mile distance and board a survival craft.
Next question
Code: OWFT Which of air and water is the fluid that transfers the greatest amount of heat during the same time, given that the fluid is not flowing along the immersed body?
Air.
Both are transferring equally.
Water.
Next question
Code: NPLF, RBEN Which one of the following types of rope is the most dangerous to work with?
Nylon.
Manila.
Still wire.
Polypropylene.
Next question
Code: NNPQ, NKTF The responsibility for safety and security rests with everybody on board the vessel. General house-keeping rules should be followed. Which of the listed rules is the most important?
Keep tools within easy reach during work.
Do not carry lighters or matches when working outdoors.
Keep your working area clean and tidy.
Next question
Code: VVBI Which Security Levels requires the highest security alert?
Security Level 3.
Security Level 2.
Security Level 1.
Next question
Code: NVCD What do crew, visitors and contractors all have in common?
They all have opportunity to smuggle drugs.
They’re all employees of the ship.
They’re all onboard the ship for the duration of its voyage.
They’re all trained in ship emergency procedures.
Next question
Code: RDHU What is “defrosting” associated with?
Fan containers.
Reefer containers.
Containers carrying IMDG cargoes.
Dry cargo ventilated containers.
Next question
Code: KGIV On a container vessel, what would you do if you saw a container being damaged during loading operations?
Note the date and time of occurrence, container number and if possible take photographs.
Inform the relieving watchkeeper.
Inform the master.
Call the duty officer.
Next question
Code: ISAH On board a container vessel, which of the following is not likely to be displayed by the loading computer?
Stresses in the sea-going condition.
Fluid GM.
Stowage positions of high-cube containers.
Stack weights incorporating high-cube containers.
Next question
Code: KGFM On a container vessel, what indicates the correct weight of a wrongly declared container?
Strain gauges fitted to the shore gantry cranes.
The ship’s loading computer.
The container CSC plate.
The tare weight stamped on the container.
Next question
Code: CHTJ On a container vessel, with regard to fire precautions, what must be ensured prior to securing hatch pontoons?
That under-deck cargo operations have been completed.
That the cargo hold fire-fighting system has been checked.
That the duty officer’s permission has been obtained to secure the pontoons.
That all cargo clusters have been removed from the hold.
Next question
Code: JKJV On a container vessel, what will attending surveyors inspect when containers have been lost overboard?
Certificates of approval related to lashing equipment used to secure those containers.
The vessel’s Safety Construction certificate.
The on-board cargo lashing inventory.
The vessel’s Class certificate.
Next question
Code: JLCJ On a container vessel, what should be done if a twistlock is found cracked at the base?
Remove it from service.
Use it to lock under-deck container stows.
Use it in the lowest tier on deck.
Next question
Code: DBRU What will be the consequences of a ship’s failure to correct an unsafe stevedore working practice in the United States?
The master will be arrested.
The port will lodge a protest against the ship.
The ship will be prosecuted.
The duty officer will be arrested.
Next question
Code: VMEJ What is a “Fantainer” used for?
Carrying dry cargoes prone to condensation.
Carrying steel coils.
Carrying reefer cargoes prone to condensation.
Carrying dangerous goods prone to condensation.
Next question
Code: BCBD On a container vessel, under the IMDG Code what class is assigned to a Fumigated Container?
Class 8.
Class 9.
Class 6.
Class 5.
Next question
Code: RHFC On a container vessel, under which IMDG Class is fishmeal carried when not treated with anti-oxidants?
Class 4.1 – Flammable solid.
Class 9 – Miscellaneous dangerous substances and articles.
Class 4.2 – Flammable solid.
Class 5.1 – Oxidizing substances.
Next question
Code: QLMC Why must duty crew members supervise the lashing of containers?
Because stevedores often apply container lashings haphazardly or place twistlocks incorrectly.
Because of local port regulations.
Because it is an international requirement under the ISM Code.
Because of time containers on the vessel towards the end of cargo operations.
Next question
Code: ABMW What determines how containers should be lashed?
The cargo security manual.
SOLAS 74/78.
OSHA regulations.
Advice from shore planners.
Next question
Code: KLHX What does OSHA stand for?
Occupation and Safe Health Association.
Occupational Safety and Health Administration.
Overseas Sea Hazard Association.
Occupational Safety and Health Aids.
Next question
Code: MQXC Where do OSHA regulations apply?
United States of America.
European Union.
Australia.
United Arab Emirates.
Next question
Code: FNDY What general background colour is used on warning signs which require a specific “mandatory” action, such as one which might require the wearing of goggles during particular work task?
Blue.
Yellow.
Red.
Green.
Next question
Code: NYNA What general background colour is used on warning signs that indicate emergency of first-aid features, or indicate a safe condition?
Yellow.
Red.
Blue.
Green.
Next question
Code: KLAP What is the meaning of “Make Fast”?
Make Fast means to secure a rope.
Make Fast means to avoid all meals.
Make Fast means to act very quickly.
Make Fast means to avoid all meals.
Next question
Code: OVFY What do you understand by “Bitter end”?
The toggled end of a lifeboat painter.
The end link of an anchor cable that is secured within the chain locker.
To the very last moment.
A foul taste at the end of a meal.
Next question
Code: WDEJ Which of the following is false when a casualty is bleeding?
Cover the wound with a cloth.
Control bleeding.
Treat for the shock.
Encourage patient to lie quite and re-assure.
Next question
Code: PYPE All heat burns should be:
Cooled as quickly as possible with running cold water for at least 10 minutes.
Treated by the doctor only.
Applied with soothing lotion as soon as possible.
Covered with Gauze or bandage immediately.
Next question
Code: YSQG Port State Control Officers are authorised to:
Inspect and detain ship that are not meeting the requirements until they are able to demonstrate compliance with the regulations.
Detain ships that are not meeting the requirements for a minimum of 30 days.
Regularly inspect ships known to meet the requirement.
Next question
Code: OSOO Which of these emission control requirements is correct?
Low sulphur fuels reduce emissions of volatile organic compounds.
Installation of an exhaust gas cleaning system reduces emission of nitrogen oxide.
Equipment containing ozone-depleting substances may be dumped at sea 50 miles from land.
Incineration of PCB’s is permitted.
Next question
Code: OIQO On a container vessel, where should containers with untreated fishmeal cargo be carried?
Under deck.
On deck.
On deck away from sunlight.
Separated from Class 4.2 containers.
Next question
Code: DWDH, KMRH On a container vessel, what is the purpose of fixed stacking cones?
To prevent horizontal movement of 20′ containers in 40′ cell guides.
To prevent the horizontal movement of 40′ containers at tank top level.
To prevent movement of 20′ and 40′ containers at deck level.
Next question
Code: AJAS On a container vessel, where should a mid-bay guide be positioned?
On the tank top mid-way in 40′ guides to prevent transverse movement of 20′ containers.
On the tank top at the ends of 40′ container bays.
At the base of cell guides.
Next question
Code: VWPG When will a hatch pontoon’s side cleat need replacement?
When the cleat retainer is rusty.
When the rubber washer is compressed and hardened.
When the cleat retainer is distorted.
When the cleat has sprung open at sea.
Next question
Code: DAMK What is the function of a lashing plate?
As tie down point for turnbuckles on deck or hatch cover.
A means of securing buttresses under-deck.
A means of securing the hatch covers.
Next question
Code: GRPM A container vessel must alter her trim to depart even keel from the berth. Select the most appropriate means of altering trim.
By internal shift of ballast.
By altering the cargo disposition.
By discharging ballast from the deepest draught end of the vessel.
Next question
Code: QMYB On a container vessel, where will you find the Dangerous Goods List?
In Part 3 of the IMDG Code Volume 2.
In SOLAS 74/78.
In the Cargo Securing Manual.
In Chapter 3.6 of the IMDG Code Volume 2.
Next question
Code: NMES On a container vessel, which of these motions is not taken into account when calculating forces on a container stow?
Heaving.
Rolling.
Pitching.
Surging.
Next question
* In some questions may be more, than one right answer.
CES test finished! Your result:
Correct answers:
good
Very good