Coaxial Cable – Definition and Pronunciation
What is Coaxial Cable?
Coaxial cable is a cable used principally as a transmission line for RF signals that has relatively low loss at mid-to-high frequencies (3–20 GHz). It supports mid-range power levels (waveguide is used at high-power high-frequency). A coax cable consists of an inner conductor, which may be solid or stranded wire, and dialectic filler, covered by a flexible wire braid. (Metal foil may also be used.) All of these are covered by an insulating material.
Examples of Coaxial Cable
As received from the factory, the Loran-C typically includes the receiver itself, an antenna, an antenna coupler, a coaxial cable for the connection from the coupler to the receiver, a power cord, and miscellaneous installation hardware (e. g., yoke mount, nuts, bolts, screws). Use only the antenna supplied with the receiver or an alternate recommended by the manufacturer.
From “Installation and Related Matters of Loran-C”.
Any electronics replacement is primarily concerned with the antenna and sensor installation. This is always more difficult than just bringing aboard a new black box. In the case of a radar, the cost ranges from $1 500 to $3 000 just for the components, when considering the average 12-mile radar range. In order to be compatible with the new transceiver, the antenna and coaxial cable will have to be replaced, also.
From “Anatomy of a Boat Cost and Recommendations for a Profitable Sale”.
Antennas must be located on the top of the deck house to provide good reception with little interference and the coaxial cable connecting the antenna to the transmitters must be of the proper size.
From “Professional Advice Consultations on the Marine Boat Survey”.
Pronunciation of Coaxial Cable
